Zytel® 70G50HSL NC010

Alternative and trade names
PA66-GF50
Want to keep this datasheet? Save it now in your required format

Description

Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured.The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry. Zytel® 70G50HSL NC010 is a 50% Glass Reinforced, Heat Stabilized, Polyamide 66

Equivalent Materials

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.58 g/cm³

Show Material materials with Density of 1.58 g/cm³

ISO 1183

Water absorption

23.0 °C

0.8 %

Show Material materials with Water absorption of 0.8 %

Sim. to ISO 62 | Immersion 24h

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

17 GPa

Show Material materials with Elastic modulus of 17 GPa

ISO 527-1/-2

Elongation

23.0 °C

2.6 %

Show Material materials with Elongation of 2.6 %

ISO 527-1/-2

Flexural modulus

23.0 °C

16 GPa

Show Material materials with Flexural modulus of 16 GPa

ISO 178

Flexural strength

23.0 °C

390 MPa

Show Material materials with Flexural strength of 390 MPa

ISO 178

Hardness, Ball Indentation

23.0 °C

300 MPa

Show Material materials with Hardness, Ball Indentation of 300 MPa

ISO 2039-1

Impact strength, Charpy notched

-6.0 °C

14 kJ/m²

Show Material materials with Impact strength, Charpy notched of 14 kJ/m²

ISO 179/1eA

23.0 °C

17 kJ/m²

Show Material materials with Impact strength, Charpy notched of 17 kJ/m²

ISO 179/1eA

Impact strength, Charpy unnotched

-6.0 °C

100 kJ/m²

Show Material materials with Impact strength, Charpy unnotched of 100 kJ/m²

ISO 179/1eU

23.0 °C

100 kJ/m²

Show Material materials with Impact strength, Charpy unnotched of 100 kJ/m²

ISO 179/1eU

Unlock all property charts

Poisson's ratio

23.0 °C

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Tensile strength

23.0 °C

240 MPa

Show Material materials with Tensile strength of 240 MPa

ISO 527-1/-2

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

1.7E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.7E-5 1/K

ASTM E 831 | 55 - 160°C

Coefficient of thermal expansion, transverse

23.0 °C

6.1E-5 1/K

Show Material materials with Coefficient of thermal expansion, transverse of 6.1E-5 1/K

ASTM E 831 | 23 - 55°C

Heat deflection temperature, 1.80 MPa

258 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 258 °C

ISO 75-1/-2

Melting point

262 °C

Show Material materials with Melting point of 262 °C

ISO 11357-1/-3 | 18°F/min

Relative temperature index, electrical

120 °C

Show Material materials with Relative temperature index, electrical of 120 °C

UL 746B | 120mil

Relative temperature index, mechanical impact

130 °C

Show Material materials with Relative temperature index, mechanical impact of 130 °C

UL 746B | 120mil

Relative temperature index, mechanical strength

130 °C

Show Material materials with Relative temperature index, mechanical strength of 130 °C

UL 746B | 120mil

Vicat softening temperature

255 °C

Show Material materials with Vicat softening temperature of 255 °C

ISO 306 | 90°F/h, 11 lbf

Flammability

Burning Behav. at 60mil nom. thickn.: HB class, Thickness tested: 1.5 mm, UL recognition: yes -, Burning Behav. at thickness h: HB class, Thickness tested: 0.83 mm, UL recognition: yes -, Glow Wire Flammability Index, 30mil: 650 °C, Glow Wire Flammability Index, 60mil: 675 °C, Glow Wire Flammability Index, 120mil: 850 °C, Glow Wire Ignition Temperature, 30mil: 700 °C, FMVSS Class: SE -

Rheological Properties

PropertyTemperatureValueComment

Shrinkage

23.0 °C

0.2 %

Show Material materials with Shrinkage of 0.2 %

ISO 294-4, 2577

Shrinkage, transverse

23.0 °C

0.8 %

Show Material materials with Shrinkage, transverse of 0.8 %

ISO 294-4, 2577

Technological properties

Property
Fillers

50% Glass Fiber

Processing methods

Drying Recommended: yes, Drying Temperature: 80°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.2%, Melt Temperature Optimum: 295°C, Min. melt temperature: 285°C, Max. melt temperature: 305°C, Max. screw tangential speed: 0.2m/s, Mold Temperature Optimum: 100°C, Min. mold temperature: 70°C, Max. mold temperature: 120°C, Hold pressure range: 50-100MPa, Hold pressure time: 3s/mm, Ejection temperature: 210°C