Rynite® 545 NC010

Alternative and trade names
PET-GF45
Want to keep this datasheet? Save it now in your required format

Description

Common features of Rynite® thermoplastic polyester include mechanical and physical properties such as excellent balance of strength and stiffness, dimensional stability, creep resistance, heat resistance,high surface gloss and good inherent electrical properties at elevated temperature. It can be processed over a broad temperature range and has excellent flow properties. Rynite® thermoplastic polyester resins aretypically used in demanding applications in the automotive, electrical and electronics, appliances where they successfully replace metals and thermosets, as well as other thermoplastic polymers. Rynite® 545NC010 is a 45% glass reinforced modified polyethylene terephthalate resin.

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.69 g/cm³

Show Material materials with Density of 1.69 g/cm³

ISO 1183

Water absorption

23.0 °C

0.62 %

Show Material materials with Water absorption of 0.62 %

Sim. to ISO 62 | 80mil

Mechanical

PropertyTemperatureValueComment

Compressive strength

23.0 °C

230 MPa

Show Material materials with Compressive strength of 230 MPa

ISO 604

Elastic modulus

23.0 °C

15.5 GPa

Show Material materials with Elastic modulus of 15.5 GPa

ISO 527-1/-2

Elongation

23.0 °C

2 %

Show Material materials with Elongation of 2 %

ISO 527-1/-2

Flexural modulus

23.0 °C

13.5 GPa

Show Material materials with Flexural modulus of 13.5 GPa

ISO 178

Hardness, Rockwell M

23.0 °C

100 [-]

Show Material materials with Hardness, Rockwell M of 100 [-]

ISO 2039-2

Hardness, Rockwell R

23.0 °C

120 [-]

Show Material materials with Hardness, Rockwell R of 120 [-]

ISO 2039-2

Impact strength, Charpy notched

-6.0 °C

11 kJ/m²

Show Material materials with Impact strength, Charpy notched of 11 kJ/m²

ISO 179/1eA

23.0 °C

11 kJ/m²

Show Material materials with Impact strength, Charpy notched of 11 kJ/m²

ISO 179/1eA

Impact strength, Charpy unnotched

-6.0 °C

40 kJ/m²

Show Material materials with Impact strength, Charpy unnotched of 40 kJ/m²

ISO 179/1eU

23.0 °C

60 kJ/m²

Show Material materials with Impact strength, Charpy unnotched of 60 kJ/m²

ISO 179/1eU

Unlock all property charts

Impact strength, Izod unnotched

23.0 °C

11 kJ/m²

Show Material materials with Impact strength, Izod unnotched of 11 kJ/m²

ISO 180/1A

Poisson's ratio

23.0 °C

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Shear strength

23.0 °C

50 MPa

Show Material materials with Shear strength of 50 MPa

ASTM D 732

Tensile strength

23.0 °C

182 MPa

Show Material materials with Tensile strength of 182 MPa

ISO 527-1/-2

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

1.5E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.5E-5 1/K

ISO 11359-1/-2

Coefficient of thermal expansion, transverse

23.0 °C

8.3E-5 1/K

Show Material materials with Coefficient of thermal expansion, transverse of 8.3E-5 1/K

ISO 11359-1/-2

Heat deflection temperature, 1.80 MPa

226 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 226 °C

ISO 75-1/-2

Heat deflection temperature, 8.0 MPa

180 °C

Show Material materials with Heat deflection temperature, 8.0 MPa of 180 °C

ISO 75-1/-2

Melting point

252 °C

Show Material materials with Melting point of 252 °C

ISO 11357-1/-3 | 18°F/min

Relative temperature index, electrical

140 °C

Show Material materials with Relative temperature index, electrical of 140 °C

UL 746B | 120mil

Relative temperature index, mechanical impact

140 °C

Show Material materials with Relative temperature index, mechanical impact of 140 °C

UL 746B | 120mil

Relative temperature index, mechanical strength

140 °C

Show Material materials with Relative temperature index, mechanical strength of 140 °C

UL 746B | 120mil

Thermal conductivity

23.0 °C

0.32 W/(m·K)

Show Material materials with Thermal conductivity of 0.32 W/(m·K)

of solid

Thermal diffusivity

23.0 °C

0 mm²/s

Show Material materials with Thermal diffusivity of 0 mm²/s

Vicat softening temperature

230 °C

Show Material materials with Vicat softening temperature of 230 °C

ISO 306 | 90°F/h, 11 lbf

Flammability

Burning Behav. at 60mil nom. thickn.: HB class, Thickness tested: 1.5 mm, UL recognition: yes -, Burning Behav. at thickness h: HB class, Thickness tested: 0.75 mm, UL recognition: yes -, Oxygen index: 20 %, Glow Wire Flammability Index, 80mil: 750 °C, Glow Wire Flammability Index, 120mil: 850 °C, Glow Wire Ignition Temperature, 120mil: 825 °C, Glow Wire Temperature, No Flame, 40mil: 775 °C, Glow Wire Temperature, No Flame, 60mil: 775 °C, Glow Wire Temperature, No Flame, 80mil: 775 °C, Glow Wire Temperature, No Flame, 120mil: 850 °C, FMVSS Class: B -, Burning rate, Thickness 1 mm: <80 mm/min

Electrical

PropertyTemperatureValueComment

Comparative tracking index

23.0 °C

2 V

Show Material materials with Comparative tracking index of 2 V

UL 746A

Dielectric constant, 100Hz

23.0 °C

4.5 [-]

Show Material materials with Dielectric constant, 100Hz of 4.5 [-]

IEC 62631-2-1

Dielectric constant, 1MHz

23.0 °C

4.4 [-]

Show Material materials with Dielectric constant, 1MHz of 4.4 [-]

IEC 62631-2-1

Dielectric strength

23.0 °C

32 kV/mm

Show Material materials with Dielectric strength of 32 kV/mm

IEC 60243-1

Dissipation factor, 100Hz

23.0 °C

7E-3 [-]

Show Material materials with Dissipation factor, 100Hz of 7E-3 [-]

IEC 62631-2-1

Dissipation factor, 1MHz

23.0 °C

0.01 [-]

Show Material materials with Dissipation factor, 1MHz of 0.01 [-]

IEC 62631-2-1

Surface resistivity

23.0 °C

1.00E+14 Ω/sq

Show Material materials with Surface resistivity of 1.00E+14 Ω/sq

IEC 62631-3-2

Volume resistivity

23.0 °C

1.00E+15 Ω·cm

Show Material materials with Volume resistivity of 1.00E+15 Ω·cm

IEC 62631-3-1

Rheological Properties

PropertyTemperatureValueComment

Shrinkage

23.0 °C

0.2 %

Show Material materials with Shrinkage of 0.2 %

ISO 294-4, 2577

Shrinkage, transverse

23.0 °C

0.8 %

Show Material materials with Shrinkage, transverse of 0.8 %

ISO 294-4, 2577

Technological properties

Property
Fillers

45% Glass Fiber

Processing methods

Drying Recommended: yes, Drying Temperature: 120°C, Drying Time, Dehumidified Dryer: 4-6h, Processing Moisture Content: ≤0.02%, Melt Temperature Optimum: 285°C, Min. melt temperature: 280°C, Max. melt temperature: 300°C, Max. screw tangential speed: 0.2m/s, Mold Temperature Optimum: 120°C, Min. mold temperature: 110°C, Max. mold temperature: 130°C, Hold pressure range: ≥80MPa, Hold pressure time: 4s/mm, Back pressure: As low as possible, Ejection temperature: 170°C