Zytel® 70G35HSLX BK357

Alternative and trade names
PA66-GF35
Want to keep this datasheet? Save it now in your required format

Description

Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured.The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.Zytel® 70G35HSLX BK357 is a 35% glass fiber reinforced, heat stabilized, black polyamide 66 for injection molding.

Equivalent Materials

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.41 g/cm³

Show Material materials with Density of 1.41 g/cm³

ISO 1183

Water absorption

23.0 °C

1.1 %

Show Material materials with Water absorption of 1.1 %

Sim. to ISO 62 | Immersion 24h

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

11 GPa

Show Material materials with Elastic modulus of 11 GPa

ISO 527-1/-2

Elongation

23.0 °C

3 %

Show Material materials with Elongation of 3 %

ISO 527-1/-2

Flexural modulus

23.0 °C

9.5 GPa

Show Material materials with Flexural modulus of 9.5 GPa

ISO 178

Flexural strength

23.0 °C

300 MPa

Show Material materials with Flexural strength of 300 MPa

ISO 178

Hardness, Ball Indentation

23.0 °C

285 MPa

Show Material materials with Hardness, Ball Indentation of 285 MPa

ISO 2039-1

Hardness, Rockwell M

23.0 °C

110 [-]

Show Material materials with Hardness, Rockwell M of 110 [-]

ISO 2039-2

Hardness, Rockwell R

23.0 °C

125 [-]

Show Material materials with Hardness, Rockwell R of 125 [-]

ISO 2039-2

Impact strength, Charpy notched

-6.0 °C

10 kJ/m²

Show Material materials with Impact strength, Charpy notched of 10 kJ/m²

ISO 179/1eA

23.0 °C

13 kJ/m²

Show Material materials with Impact strength, Charpy notched of 13 kJ/m²

ISO 179/1eA

Impact strength, Charpy unnotched

-6.0 °C

80 kJ/m²

Show Material materials with Impact strength, Charpy unnotched of 80 kJ/m²

ISO 179/1eU

23.0 °C

80 kJ/m²

Show Material materials with Impact strength, Charpy unnotched of 80 kJ/m²

ISO 179/1eU

Unlock all property charts

Impact strength, Izod notched

-30.0 °C

60 kJ/m²

Show Material materials with Impact strength, Izod notched of 60 kJ/m²

ISO 180/1U

23.0 °C

60 kJ/m²

Show Material materials with Impact strength, Izod notched of 60 kJ/m²

ISO 180/1U

Unlock all property charts

Impact strength, Izod unnotched

-40.0 °C

10 kJ/m²

Show Material materials with Impact strength, Izod unnotched of 10 kJ/m²

ISO 180/1A

23.0 °C

12 kJ/m²

Show Material materials with Impact strength, Izod unnotched of 12 kJ/m²

ISO 180/1A

Unlock all property charts

Poisson's ratio

23.0 °C

0.34 [-]

Show Material materials with Poisson's ratio of 0.34 [-]

Tensile strength

23.0 °C

210 MPa

Show Material materials with Tensile strength of 210 MPa

ISO 527-1/-2

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

1.7E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.7E-5 1/K

ISO 11359-1/-2

Coefficient of thermal expansion, transverse

23.0 °C

8.5E-5 1/K

Show Material materials with Coefficient of thermal expansion, transverse of 8.5E-5 1/K

ISO 11359-1/-2

Glass transition temperature

70 °C

Show Material materials with Glass transition temperature of 70 °C

ISO 11357-1/-2 | 18°F/min

Heat deflection temperature, 0.45 MPa

260 °C

Show Material materials with Heat deflection temperature, 0.45 MPa of 260 °C

ISO 75-1/-2

Heat deflection temperature, 1.80 MPa

252 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 252 °C

ISO 75-1/-2

Melting point

263 °C

Show Material materials with Melting point of 263 °C

ISO 11357-1/-3 | 18°F/min

Specific heat capacity

23.0 °C

2130 J/(kg·K)

Show Material materials with Specific heat capacity of 2130 J/(kg·K)

of melt

Flammability

Burning Behav. at 60mil nom. thickn.: HB class, Thickness tested: 1.5 mm, Burning Behav. at thickness h: HB class, Thickness tested: 0.7 mm, Oxygen index: 21 %, Glow Wire Flammability Index, 80mil: 650 °C, Glow Wire Flammability Index, 120mil: 750 °C, FMVSS Class: B -, Burning rate, Thickness 1 mm: 30 mm/min

Electrical

PropertyTemperatureValueComment

Dielectric constant, 1MHz

23.0 °C

4.1 [-]

Show Material materials with Dielectric constant, 1MHz of 4.1 [-]

IEC 62631-2-1

Dissipation factor, 1MHz

23.0 °C

0.01 [-]

Show Material materials with Dissipation factor, 1MHz of 0.01 [-]

IEC 62631-2-1

Volume resistivity

23.0 °C

1.00E+15 Ω·cm

Show Material materials with Volume resistivity of 1.00E+15 Ω·cm

IEC 62631-3-1

Rheological Properties

PropertyTemperatureValueComment

Shrinkage

23.0 °C

0.3 %

Show Material materials with Shrinkage of 0.3 %

ISO 294-4, 2577

Shrinkage, transverse

23.0 °C

1.1 %

Show Material materials with Shrinkage, transverse of 1.1 %

ISO 294-4, 2577

Technological properties

Property
Fillers

35% Glass Fiber

Processing methods

Drying Recommended: yes, Drying Temperature: 80°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.2%, Melt Temperature Optimum: 295°C, Min. melt temperature: 285°C, Max. melt temperature: 305°C, Max. screw tangential speed: 0.2m/s, Mold Temperature Optimum: 100°C, Min. mold temperature: 70°C, Max. mold temperature: 120°C, Hold pressure range: 50-100MPa, Hold pressure time: 3s/mm, Ejection temperature: 210°C