Zytel® HTN55G55TLW BK773

Alternative and trade names
PA-I-GF55
Want to keep this datasheet? Save it now in your required format

Description

Zytel® HTN high performance polyamide resins feature high retention of properties upon exposure to elevated temperature, to high moisture, and to harsh chemical environments. Polymer families and grades of Zytel® HTN are tailored to optimize performance as well as processability. Typical applications with Zytel® HTN include demanding applications in the automotive, electrical and electronics, domestic appliances, and construction industries. Zytel® HTN55G55TLW BK773 is a 55% glass reinforced high performance polyamide resinwith improved toughness and low warpage, developed for structural applications where good flow is needed in thin sections. It is also a PPA resin.

Equivalent Materials

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.68 g/cm³

Show Material materials with Density of 1.68 g/cm³

ISO 1183

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

21 GPa

Show Material materials with Elastic modulus of 21 GPa

ISO 527-1/-2

Elongation

23.0 °C

1.8 %

Show Material materials with Elongation of 1.8 %

ISO 527-1/-2

Flexural modulus

23.0 °C

17.9 GPa

Show Material materials with Flexural modulus of 17.9 GPa

ISO 178

Flexural strength

23.0 °C

380 MPa

Show Material materials with Flexural strength of 380 MPa

ISO 178

Impact strength, Charpy notched

-6.0 °C

25 kJ/m²

Show Material materials with Impact strength, Charpy notched of 25 kJ/m²

ISO 179/1eA

23.0 °C

21 kJ/m²

Show Material materials with Impact strength, Charpy notched of 21 kJ/m²

ISO 179/1eA

Impact strength, Charpy unnotched

-6.0 °C

60 kJ/m²

Show Material materials with Impact strength, Charpy unnotched of 60 kJ/m²

ISO 179/1eU

23.0 °C

80 kJ/m²

Show Material materials with Impact strength, Charpy unnotched of 80 kJ/m²

ISO 179/1eU

Unlock all property charts

Poisson's ratio

23.0 °C

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Tensile strength

23.0 °C

260 MPa

Show Material materials with Tensile strength of 260 MPa

ISO 527-1/-2

Thermal

PropertyValueComment

Heat deflection temperature, 1.80 MPa

244 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 244 °C

ISO 75-1/-2

Melting point

296 °C

Show Material materials with Melting point of 296 °C

ISO 11357-1/-3 | first heat

Flammability

Burning Behav. at thickness h: HB class, Thickness tested: 0.75 mm, UL recognition: yes -, Glow Wire Flammability Index, 30mil: 725 °C, Glow Wire Flammability Index, 60mil: 725 °C, Glow Wire Flammability Index, 120mil: 960 °C, Glow Wire Ignition Temperature, 30mil: 750 °C, Glow Wire Ignition Temperature, 60mil: 750 °C, Glow Wire Ignition Temperature, 120mil: 850 °C, FMVSS Class: B -, Burning rate, Thickness 1 mm: <80 mm/min

Rheological Properties

PropertyTemperatureValueComment

Shrinkage

23.0 °C

0.1 %

Show Material materials with Shrinkage of 0.1 %

ISO 294-4, 2577

Shrinkage, transverse

23.0 °C

0.2 %

Show Material materials with Shrinkage, transverse of 0.2 %

ISO 294-4, 2577

Technological properties

Property
Fillers

55% Glass Fiber

Processing methods

Drying Recommended: yes, Drying Temperature: 100°C, Drying Time, Dehumidified Dryer: 6-8h, Processing Moisture Content: ≤0.1%, Min. melt temperature: 300°C, Max. melt temperature: 315°C, Min. mold temperature: 70°C, Max. mold temperature: 130°C