Zytel® RS LC1610 BK387

Alternative and trade names
PA1010-HIP
Want to keep this datasheet? Save it now in your required format

Description

Zytel® RS LC1610 BK387 is an unreinforced, toughened, plasticized, and heat stabilized,biobased polyamide 1010 resin for extrusion.

Equivalent Materials

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.05 g/cm³

Show Material materials with Density of 1.05 g/cm³

ISO 1183

Water absorption

23.0 °C

1.5 %

Show Material materials with Water absorption of 1.5 %

Sim. to ISO 62 | 80mil

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

0.79 GPa

Show Material materials with Elastic modulus of 0.79 GPa

ISO 527-1/-2

Elongation

23.0 °C

230 %

Show Material materials with Elongation of 230 %

ISO 527-1/-2 | 50mm/min

Elongation at yield

23.0 °C

32 %

Show Material materials with Elongation at yield of 32 %

ISO 527-1/-2

Flexural strength

23.0 °C

24 MPa

Show Material materials with Flexural strength of 24 MPa

ISO 178

Impact strength, Charpy notched

-6.0 °C

7 kJ/m²

Show Material materials with Impact strength, Charpy notched of 7 kJ/m²

ISO 179/1eA

23.0 °C

24 kJ/m²

Show Material materials with Impact strength, Charpy notched of 24 kJ/m²

ISO 179/1eA

Impact strength, Izod unnotched

-30.0 °C

6 kJ/m²

Show Material materials with Impact strength, Izod unnotched of 6 kJ/m²

ISO 180/1A

23.0 °C

24 kJ/m²

Show Material materials with Impact strength, Izod unnotched of 24 kJ/m²

ISO 180/1A

Unlock all property charts

Poisson's ratio

23.0 °C

0.46 [-]

Show Material materials with Poisson's ratio of 0.46 [-]

Tensile strength

23.0 °C

38 MPa

Show Material materials with Tensile strength of 38 MPa

ISO 527-1/-2 | 50mm/min

Yield strength

23.0 °C

38 MPa

Show Material materials with Yield strength of 38 MPa

ISO 527-1/-2

Impact strength, Charpy unnotched

No Break @ 23,-6°C, ISO 179/1eA

Thermal

PropertyValueComment

Heat deflection temperature, 0.45 MPa

110 °C

Show Material materials with Heat deflection temperature, 0.45 MPa of 110 °C

ISO 75-1/-2

Heat deflection temperature, 1.80 MPa

46 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 46 °C

ISO 75-1/-2

Melting point

197 °C

Show Material materials with Melting point of 197 °C

ISO 11357-1/-3 | 18°F/min

Flammability

Burning Behav. at 60mil nom. thickn.: HB class, Thickness tested: 1.5 mm, Burning Behav. at thickness h: HB class, Thickness tested: 3 mm, FMVSS Class: B -, Burning rate, Thickness 1 mm: <80 mm/min

Rheological Properties

PropertyTemperatureValueComment

Melt viscosity

250.0 °C

210 Pa·s

Show Material materials with Melt viscosity of 210 Pa·s

ISO 11443 | @ 1000 sec-1, 250°C

Shrinkage

23.0 °C

1.6 %

Show Material materials with Shrinkage of 1.6 %

ISO 294-4, 2577

Shrinkage, transverse

23.0 °C

1 %

Show Material materials with Shrinkage, transverse of 1 %

ISO 294-4, 2577

Technological properties

Property
Processing methods

Drying Recommended: yes, Drying Time, Dehumidified Dryer: 4-6h, Processing Moisture Content: ≤0.1%, Melt Temperature Optimum: 230°C, Min. melt temperature: 225°C, Max. melt temperature: 235°C, Mold Temperature Optimum: 55°C, Min. mold temperature: 50°C, Max. mold temperature: 80°C