Polyamide 610 Reinforced with 30% Glass Fibre (PA610+GF30)

Alternative and trade names
Rilsan®, Grilamid®, Ultramid®, Radilon®

Want to keep this datasheet? Save it now in your required format

Description

Reinforced Polyamide 610 with 30% glass fiber. These materials are distinguished by high mechanical strength, hardness, rigidity, thermostability, heat aging resistant and resistance to hot lubricants and hot water. Parts made from them show dimensional stability and high creep strength.

This material data has been provided by M-Base.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Value
Density	1.3 - 1.32 g/cm³ Show Material materials with Density of 1.3 - 1.32 g/cm³

Mechanical

Property	Value	Comment
Elastic modulus	6.2 - 7.8 GPa Show Material materials with Elastic modulus of 6.2 - 7.8 GPa
Elongation	3.0 - 8.0 % Show Material materials with Elongation of 3.0 - 8.0 %
Impact strength, Charpy notched	12.0 - 16.0 kJ/m² Show Material materials with Impact strength, Charpy notched of 12.0 - 16.0 kJ/m²
Impact strength, Charpy unnotched	85 kJ/m² Show Material materials with Impact strength, Charpy unnotched of 85 kJ/m²
	100 kJ/m² Show Material materials with Impact strength, Charpy unnotched of 100 kJ/m²
Tensile strength	110.0 - 130.0 MPa Show Material materials with Tensile strength of 110.0 - 130.0 MPa	at 3-8% strain

Thermal

Property	Value
Coefficient of thermal expansion	2.5e-05 - 0.00011 1/K Show Material materials with Coefficient of thermal expansion of 2.5e-05 - 0.00011 1/K
Melting point	215.0 - 222.0 °C Show Material materials with Melting point of 215.0 - 222.0 °C
Flammability	UL 94 HB

Electrical

Property	Value
Dielectric constant	3.8 [-] Show Material materials with Dielectric constant of 3.8 [-]
	4.3 [-] Show Material materials with Dielectric constant of 4.3 [-]
Electrical resistivity	10000000000.0 - 10000000000000.0 Ω·m Show Material materials with Electrical resistivity of 10000000000.0 - 10000000000000.0 Ω·m

Optical

Property	Value
Transparency	no

Technological properties

Property
Application areas	quick connectors, fans, gear components, pipes, cable ties
Fillers	30% Glass Fiber
Other	You are viewing a generic polymer page, for more information please contact the suppliers or Matmatch, or use our Search under the following link to find more specific grades and formulations based on your application: Polymer Advanced Search
Processing methods	Injection molding, extrusion

Polyamide 610 Reinforced with 30% Glass Fibre (PA610+GF30)

Description

Ashby charts

Applications

Suggested reading

Properties