Thermoplastic starch (PSAC)

Alternative and trade names
Bioplast®

Want to keep this datasheet? Save it now in your required format

Description

Depending on the grade it has the following features: Good Drawdown, Heat Sealable, Barrier Properties, Soft Feel.

This material data has been provided by M-Base.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Value
Density	1.1 - 1.4 g/cm³ Show Material materials with Density of 1.1 - 1.4 g/cm³

Mechanical

Property	Value	Comment
Elastic modulus	0.6 - 3.0 GPa Show Material materials with Elastic modulus of 0.6 - 3.0 GPa
Elongation	1.0 - 135.0 % Show Material materials with Elongation of 1.0 - 135.0 %
Impact strength, Charpy unnotched	3 kJ/m² Show Material materials with Impact strength, Charpy unnotched of 3 kJ/m²
	15 kJ/m² Show Material materials with Impact strength, Charpy unnotched of 15 kJ/m²
Tensile strength	10.0 - 45.0 MPa Show Material materials with Tensile strength of 10.0 - 45.0 MPa	at 1-135% strain

Thermal

Property	Value
Melting point	135.0 - 155.0 °C Show Material materials with Melting point of 135.0 - 155.0 °C

Optical

Property	Value
Transparency	no

Technological properties

Property

Application areas

Refuse bags, diapers, foamed trays and boxes, pharmaceutical capsules, biodegradable packaging

Processing methods

Injection molding, thermoforming, extrusion, foaming

Thermoplastic starch (PSAC)

Description

Ashby charts

Applications

Suggested reading

Properties