General
Property | Value |
---|---|
Density | 1.4 - 1.53 g/cm³ Show Material materials with Density of 1.4 - 1.53 g/cm³ |
Mechanical
Property | Value | Comment |
---|---|---|
Elastic modulus | 2.0 - 2.9 GPa Show Material materials with Elastic modulus of 2.0 - 2.9 GPa | |
Elongation | 15.0 - 40.0 % Show Material materials with Elongation of 15.0 - 40.0 % | |
Impact strength, Charpy notched | 3.0 - 10.0 kJ/m² Show Material materials with Impact strength, Charpy notched of 3.0 - 10.0 kJ/m² | |
Impact strength, Charpy unnotched | 50 kJ/m² Show Material materials with Impact strength, Charpy unnotched of 50 kJ/m² | |
150 kJ/m² Show Material materials with Impact strength, Charpy unnotched of 150 kJ/m² | ||
Tensile strength | 45.0 - 60.0 MPa Show Material materials with Tensile strength of 45.0 - 60.0 MPa | at 5-10% strain |
Thermal
Property | Value |
---|---|
Coefficient of thermal expansion | 9e-05 - 0.00013 1/K Show Material materials with Coefficient of thermal expansion of 9e-05 - 0.00013 1/K |
Melting point | 165.0 - 175.0 °C Show Material materials with Melting point of 165.0 - 175.0 °C |
Flammability | UL 94 HB |
Electrical
Property | Value |
---|---|
Dielectric constant | 3.7 [-] Show Material materials with Dielectric constant of 3.7 [-] |
4 [-] Show Material materials with Dielectric constant of 4 [-] | |
Electrical resistivity | 1000000000000.0 - 100000000000000.0 Ω·m Show Material materials with Electrical resistivity of 1000000000000.0 - 100000000000000.0 Ω·m |
Optical
Property | Value |
---|---|
Transparency | no |
Technological properties
Property | ||
---|---|---|
Application areas | Bearings, sliding elements | |
Fillers | PTFE | |
Processing methods | injection molding, extrusion |