Show me around

PMD.M BOPP (Biaxially Oriented Polypropylene) Metallized Film

Want to keep this datasheet? Save it now in your required format

Description

Non-heat-sealable metallized BOPP film for the production of decorative packaging. With increased coefficient of friction. For printing and lamination and for decorative packaging. The main advantages are: Standard barrier properties of metallized films; contains antiblock additives; mechanical properties are good; high adhesion of the aluminum layer; intended for contact with food; without coating or primer.

Properties

General

Density

ρ

0.91 g/cm³ at 20 °C

Film yield

Yfilm

27.5 - 54.9 m²/kg at 20 °C

Shrinkage

cshrink

4 % at 120 °C

GOST 18616, ISO 11501, ASTM D1204 (Thermal shrinkage at 120˚C, 5 min)

Shrinkage, transverse

cshrink, trans

2 % at 120 °C

GOST 18616, ISO 11501, ASTM D1204 (Thermal shrinkage at 120˚C, 5 min)

Surface density

ρsurf

1.82E-3 - 3.64E-3 g/cm² at 20 °C

Dimension

Dimensions

Available thicknesses: 20, 25, 30, 35, 40µm.

Thickness

t

0.02 - 0.04 mm

Mechanical

Elongation

A

200 % at 20 °C

Show Polypropylene (PP) materials with Elongation of 200 % at 20 °C

GOST 14236, ISO 527, ASTM D882

Elongation, transverse

A

70 % at 20 °C

Show Polypropylene (PP) materials with Elongation, transverse of 70 % at 20 °C

GOST 14236, ISO 527, ASTM D882

Tensile strength

Rm

140 MPa at 20 °C

Show Polypropylene (PP) materials with Tensile strength of 140 MPa at 20 °C

GOST 14236, ISO 527, ASTM D882

Tensile strength, transverse

Rm,trans

280 MPa at 20 °C

Show Polypropylene (PP) materials with Tensile strength, transverse of 280 MPa at 20 °C

GOST 14236, ISO 527, ASTM D882

Technological properties

Application areas

High quality rotogravure and flexographic solvent based printing; for lamination with solvent based or solventless polyurethane adhesives; production of decorative packaging for flowers, gift wrap and etc.; heat sealing by string is possible; lamination with films, paper and cardboard.

Friction

Kinetic coefficient of friction µ= 0.2-0.4 (GOST 27492, ISO 8295, ASTM D 1894).

Other

PMD.M BOPP films comprise: An aluminum layer, a treated modified copolymer layer for aluminum adhesion, a transparent oriented polypropylene core layer, a non-heat-sealable skin layer with high coefficient of friction, without treatment.

Processing history

Treatment level: 36 mN/m (ISO 8296, ASTM D 2578).

Do you need more data regarding this material?

This material data has been provided by SIBUR.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.