Description

Radel® R-5100 is a general purpose polyphenylsulfone (PPSU) that can be processed by blow molding, extrusion, film extrusion, injection molding, machining, profile extrusion, sheet extrusion, thermoforming. It is RoHS Compliant.
Agency ratings: FAA FAR 25.853a, ISO 10993, NSF STD-51, NSF STD-61
Automotive ASTM D6394 SP0312
Key features of Radel® R-5100 include:

  • Exceptional hydrolytic stability
  • Superior toughness
  • High deflection temperature
  • Resistance to environmental stress cracking
  • Flame retardant
  • Excellent thermal stability
  • Good electrical properties

Ashby charts

See where falls on the material property chart for Density against Elastic modulus in your materials selection and design process.

Properties

General

Density ρ

1.3 g/cm³ at 20 °C

ASTM D792

Mechanical

Compressive modulus Ecomp

1.73 MPa at 20 °C

ASTM D695

Compressive strength Rmc

98.9 MPa at 20 °C

ASTM D695

Elastic modulus E

2.34 GPa at 20 °C

ASTM D638

Elongation A

60 % at 20 °C

ASTM D638

Elongation at yield Ay

7.2 % at 20 °C

ASTM D638

Flexural modulus Ebend

1.7 GPa at 20 °C

ASTM D790

Flexural yield strength σy,bend

91 MPa at 20 °C

ASTM D790

Impact strength, Izod notched, ASTM IIzod,not,astm

690 J/m at 20 °C

ASTM D256

Impact strength, Izod unnotched, ASTM IIzod,unnot,astm

No Break, ASTM D256

Poisson's ratio ν

0.42 [-] at 20 °C

ASTM E132

Shear strength τ

62.7 MPa at 20 °C

ASTM D732

Tensile strength Rm

69.6 MPa at 20 °C

ASTM D638

Yield strength YS

69.6 MPa at 20 °C

ASTM D638

Thermal

Coefficient of thermal expansion α

5.6E-5 1/K at 20 °C

ASTM D696

Flammability

V-0 UL94

Glass transition temperature Tg

220 °C

ASTM E1356

Heat deflection temperature, 0.45 MPa HDT0.45,MPa

214 °C

Thermal conductivity λ

0.35 W/(m·K) at 20 °C

ASTM C177

Electrical

Dielectric constant εr

3.44 [-] at 20 °C

ASTM D150, at 60 Hz

Dielectric strength EDS

14 kV/mm at 20 °C

ASTM D149

Electrical resistivity ρel

9.00E+13 Ω·m at 20 °C

Optical

Refractive index nd

1.67 [-]

ASTM D542

Technological properties

Application areas

Aerospace Applications, Connectors,Dental Applications, Food Service Applications, Hospital Goods, Medical Devices,Medical/Healthcare Applications, Plumbing Parts,Surgical Instruments

Color

Transparent, Opaque, Black, Grey, Violet, Brown, Red, Yellow, Orange, Green, Violet

Processing methods

Blow Molding, Extrusion, Film Extrusion, Profile Extrusion, Sheet Extrusion, Thermoforming - Injection Molding: Drying Temperature: 149°C, Drying Time: 2.5 hr, Rear Temperature: 321°C, Middle Temperature: 349°C, Front Temperature: 349°C, Melt Temperature: 343-388°C, Mold Temperature: 138-163°C, Back Pressure: 0.345-0.689 MPa, Screw Compression Ratio: 2.2:1

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.