Polypropylene Homopolymer (PPH)

Alternative and trade names
Bormed™, Hostacom®, Moplen®, TECACOMP®
Want to keep this datasheet? Save it now in your required format

Description

It is an unfilled PP homopolymer, with low-medium melt flow rate. Different Stifness is achievable with wide range of grades. Film grades have high gloss, transparency and dimentional stability. Grades are also available for food industry.

This material data has been provided by M-Base.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValue

Density

0.9 - 0.915 g/cm³

Show Material materials with Density of 0.9 - 0.915 g/cm³

Mechanical

PropertyValueComment

Elastic modulus

1.3 - 1.8 GPa

Show Material materials with Elastic modulus of 1.3 - 1.8 GPa

Elongation

20.0 - 800.0 %

Show Material materials with Elongation of 20.0 - 800.0 %

Impact strength, Charpy notched

1.0 - 16.0 kJ/m²

Show Material materials with Impact strength, Charpy notched of 1.0 - 16.0 kJ/m²

Tensile strength

25.0 - 40.0 MPa

Show Material materials with Tensile strength of 25.0 - 40.0 MPa

at 8-18% strain

Impact strength, Charpy unnotched

no break

Thermal

PropertyValue

Coefficient of thermal expansion

0.0001 - 0.00015 1/K

Show Material materials with Coefficient of thermal expansion of 0.0001 - 0.00015 1/K

Melting point

160.0 - 170.0 °C

Show Material materials with Melting point of 160.0 - 170.0 °C

Specific heat capacity

2000 J/(kg·K)

Show Material materials with Specific heat capacity of 2000 J/(kg·K)

Thermal conductivity

0.17 - 0.22 W/(m·K)

Show Material materials with Thermal conductivity of 0.17 - 0.22 W/(m·K)

Flammability

UL 94 HB

Electrical

PropertyValue

Dielectric constant

2.2 [-]

Show Material materials with Dielectric constant of 2.2 [-]

2.3 [-]

Show Material materials with Dielectric constant of 2.3 [-]

Electrical resistivity

100000000000.0 - 100000000000000.0 Ω·m

Show Material materials with Electrical resistivity of 100000000000.0 - 100000000000000.0 Ω·m

Optical

PropertyValue

Transparency

no

Technological properties

Property
Application areas

Automobile interiors, air ducts, cups and food containers, suitcases, stacking boxes, hot water containers

Other

You are viewing a generic polymer page, for more information please contact the suppliers or Matmatch, or use our Search under the following link to find more specific grades and formulations based on your application:

Polymer Advanced Search

Processing methods

Injection molding, blow molding, extrusion, melt spin processes