Polyamide 6 Reinforced with 30% Long Glass Fibers (PA6+LGF30)

Alternative and trade names
Complet®, Terez, Celstran®, Akulon®, Orgalloy®, Radilon®
Want to keep this datasheet? Save it now in your required format

Description

Reinforced Polyamide 6 with 30% long glass fiber. For moulded parts with high requirements to impact, stiffness and flexural strength

This material data has been provided by M-Base.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValue

Density

1.32 - 1.36 g/cm³

Show Material materials with Density of 1.32 - 1.36 g/cm³

Mechanical

PropertyValueComment

Elastic modulus

6.0 - 9.6 GPa

Show Material materials with Elastic modulus of 6.0 - 9.6 GPa

Elongation

2.5 - 2.8 %

Show Material materials with Elongation of 2.5 - 2.8 %

Impact strength, Charpy notched

25.0 - 30.0 kJ/m²

Show Material materials with Impact strength, Charpy notched of 25.0 - 30.0 kJ/m²

Impact strength, Charpy unnotched

50 kJ/m²

Show Material materials with Impact strength, Charpy unnotched of 50 kJ/m²

75 kJ/m²

Show Material materials with Impact strength, Charpy unnotched of 75 kJ/m²

Tensile strength

115.0 - 180.0 MPa

Show Material materials with Tensile strength of 115.0 - 180.0 MPa

at 2.5-2.8% strain

Thermal

PropertyValue

Melting point

222 °C

Show Material materials with Melting point of 222 °C

Specific heat capacity

1500 J/(kg·K)

Show Material materials with Specific heat capacity of 1500 J/(kg·K)

Thermal conductivity

0.24 - 0.33 W/(m·K)

Show Material materials with Thermal conductivity of 0.24 - 0.33 W/(m·K)

Flammability

UL 94 HB

Electrical

PropertyValue

Dielectric constant

3.7 [-]

Show Material materials with Dielectric constant of 3.7 [-]

Electrical resistivity

10000000000000 Ω·m

Show Material materials with Electrical resistivity of 10000000000000 Ω·m

Optical

PropertyValue

Transparency

no

Technological properties

Property
Application areas

Automotive sunroof frames, door hinge brackets, cycling grips

Fillers

30% Long Glass Fiber

Other

You are viewing a generic polymer page, for more information please contact the suppliers or Matmatch, or use our Search under the following link to find more specific grades and formulations based on your application:

Polymer Advanced Search

Processing methods

Injection molding