General
Property | Value |
---|---|
Density | 1.55 - 1.6 g/cm³ Show Material materials with Density of 1.55 - 1.6 g/cm³ |
Mechanical
Property | Value | Comment |
---|---|---|
Elastic modulus | 11.0 - 15.0 GPa Show Material materials with Elastic modulus of 11.0 - 15.0 GPa | |
Elongation | 2.0 - 4.5 % Show Material materials with Elongation of 2.0 - 4.5 % | |
Impact strength, Charpy notched | 15.0 - 36.0 kJ/m² Show Material materials with Impact strength, Charpy notched of 15.0 - 36.0 kJ/m² | |
Impact strength, Charpy unnotched | 55 kJ/m² Show Material materials with Impact strength, Charpy unnotched of 55 kJ/m² | |
120 kJ/m² Show Material materials with Impact strength, Charpy unnotched of 120 kJ/m² | ||
Tensile strength | 130.0 - 230.0 MPa Show Material materials with Tensile strength of 130.0 - 230.0 MPa | at 2-4.5% strain |
Thermal
Property | Value |
---|---|
Coefficient of thermal expansion | 1e-05 - 7e-05 1/K Show Material materials with Coefficient of thermal expansion of 1e-05 - 7e-05 1/K |
Melting point | 255.0 - 265.0 °C Show Material materials with Melting point of 255.0 - 265.0 °C |
Thermal conductivity | 0.33 - 0.4 W/(m·K) Show Material materials with Thermal conductivity of 0.33 - 0.4 W/(m·K) |
Flammability | UL 94 HB |
Electrical
Property | Value |
---|---|
Dielectric constant | 4 [-] Show Material materials with Dielectric constant of 4 [-] |
8 [-] Show Material materials with Dielectric constant of 8 [-] | |
Electrical resistivity | 1000000000.0 - 100000000000000.0 Ω·m Show Material materials with Electrical resistivity of 1000000000.0 - 100000000000000.0 Ω·m |
Optical
Property | Value |
---|---|
Transparency | no |
Technological properties
Property | ||
---|---|---|
Application areas | End caps of charge air intercoolers, engine mounts, automotive tailgate hinges, top mounts, transmission cross beams | |
Fillers | 50% Glass Fiber | |
Other | You are viewing a generic polymer page, for more information please contact the suppliers or Matmatch, or use our Search under the following link to find more specific grades and formulations based on your application: Polymer Advanced Search | |
Processing methods | Injection molding, extrusion |