General
Property | Value |
---|---|
Density | 1.48 - 1.51 g/cm³ Show Material materials with Density of 1.48 - 1.51 g/cm³ |
Mechanical
Property | Value | Comment |
---|---|---|
Elastic modulus | 7.0 - 12.0 GPa Show Material materials with Elastic modulus of 7.0 - 12.0 GPa | |
Elongation | 5.5 - 8.0 % Show Material materials with Elongation of 5.5 - 8.0 % | |
Impact strength, Charpy notched | 21.0 - 25.0 kJ/m² Show Material materials with Impact strength, Charpy notched of 21.0 - 25.0 kJ/m² | |
Impact strength, Charpy unnotched | 100 kJ/m² Show Material materials with Impact strength, Charpy unnotched of 100 kJ/m² | |
105 kJ/m² Show Material materials with Impact strength, Charpy unnotched of 105 kJ/m² | ||
Tensile strength | 100.0 - 140.0 MPa Show Material materials with Tensile strength of 100.0 - 140.0 MPa | at 5.5-8% strain |
Thermal
Property | Value |
---|---|
Coefficient of thermal expansion | 2.5e-05 - 5e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.5e-05 - 5e-05 1/K |
Melting point | 295 °C Show Material materials with Melting point of 295 °C |
Thermal conductivity | 0.27 W/(m·K) Show Material materials with Thermal conductivity of 0.27 W/(m·K) |
Flammability | UL 94 HB |
Electrical
Property | Value |
---|---|
Dielectric constant | 4.5 [-] Show Material materials with Dielectric constant of 4.5 [-] |
16 [-] Show Material materials with Dielectric constant of 16 [-] | |
Electrical resistivity | 100000000.0 - 10000000000.0 Ω·m Show Material materials with Electrical resistivity of 100000000.0 - 10000000000.0 Ω·m |
Optical
Property | Value |
---|---|
Transparency | no |
Technological properties
Property | ||
---|---|---|
Application areas | Brushholders, e-motor bobbins, charge air cooler caps, coil insulation, EGR sensors, hot charged air ducts | |
Fillers | 40% Glass Fiber | |
Other | You are viewing a generic polymer page, for more information please contact the suppliers or Matmatch, or use our Search under the following link to find more specific grades and formulations based on your application: Polymer Advanced Search | |
Processing methods | Injection molding |