Polyamide 410 (PA410)

Alternative and trade names
Want to keep this datasheet? Save it now in your required format


It is a high-performance aliphatic, biobased polyamide that uniquely balances the benefits of typical short and long chain polyamides, such as low moisture uptake and high mechanical performance. It has wide applicability and is especially popular as a PA66 performance booster since it can be processed in the same tools. PA 410 has 30% lower moisture uptake than PA66 with higher mechanical performance.

This material data has been provided by M-Base.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.





1.05 - 1.1 g/cm³

Show Material materials with Density of 1.05 - 1.1 g/cm³



Elastic modulus

0.9 - 1.7 GPa

Show Material materials with Elastic modulus of 0.9 - 1.7 GPa

Impact strength, Charpy notched

10.0 - 75.0 kJ/m²

Show Material materials with Impact strength, Charpy notched of 10.0 - 75.0 kJ/m²

Tensile strength

35.0 - 60.0 MPa

Show Material materials with Tensile strength of 35.0 - 60.0 MPa

at 15-20% strain

Impact strength, Charpy unnotched

no break



Coefficient of thermal expansion

7e-05 - 0.00014 1/K

Show Material materials with Coefficient of thermal expansion of 7e-05 - 0.00014 1/K

Melting point

250 °C

Show Material materials with Melting point of 250 °C



Electrical resistivity

700000000000.0 - 1000000000000.0 Ω·m

Show Material materials with Electrical resistivity of 700000000000.0 - 1000000000000.0 Ω·m





Technological properties

Application areas

Engine covers, window insulating profiles, crankshaft covers


You are viewing a generic polymer page, for more information please contact the suppliers or Matmatch, or use our Search under the following link to find more specific grades and formulations based on your application:

Polymer Advanced Search

Processing methods

Injection molding, extrusion