Poly(butylene terephthalate) Reinforced with 30% Glass Beads (PBT+GB30)

Alternative and trade names
Ultradur®, Bergadur™, TECACOMP®, Arnite®, Raditer®, VYPET™
Want to keep this datasheet? Save it now in your required format


Reinforced Poly(butylene terephthalate) with 30% glass bead for low-warpage technical parts and depending on the grade with flame retardant based in halogene and good surface finish.

This material data has been provided by M-Base.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.





1.49 - 1.55 g/cm³

Show Material materials with Density of 1.49 - 1.55 g/cm³



Elastic modulus

3.5 - 6.5 GPa

Show Material materials with Elastic modulus of 3.5 - 6.5 GPa


2.0 - 6.0 %

Show Material materials with Elongation of 2.0 - 6.0 %

Impact strength, Charpy notched

2.0 - 5.0 kJ/m²

Show Material materials with Impact strength, Charpy notched of 2.0 - 5.0 kJ/m²

Impact strength, Charpy unnotched

20 kJ/m²

Show Material materials with Impact strength, Charpy unnotched of 20 kJ/m²

60 kJ/m²

Show Material materials with Impact strength, Charpy unnotched of 60 kJ/m²

Tensile strength

50.0 - 80.0 MPa

Show Material materials with Tensile strength of 50.0 - 80.0 MPa

at 2-6% strain



Coefficient of thermal expansion

7e-05 - 0.0001 1/K

Show Material materials with Coefficient of thermal expansion of 7e-05 - 0.0001 1/K

Max service temperature

200 °C

Show Material materials with Max service temperature of 200 °C


Melting point

220.0 - 225.0 °C

Show Material materials with Melting point of 220.0 - 225.0 °C

Specific heat capacity

1500 J/(kg·K)

Show Material materials with Specific heat capacity of 1500 J/(kg·K)

Thermal conductivity

0.27 W/(m·K)

Show Material materials with Thermal conductivity of 0.27 W/(m·K)


UL 94 HB



Dielectric constant

3.5 [-]

Show Material materials with Dielectric constant of 3.5 [-]

4.5 [-]

Show Material materials with Dielectric constant of 4.5 [-]

Electrical resistivity

100000000000000 Ω·m

Show Material materials with Electrical resistivity of 100000000000000 Ω·m





Technological properties

Application areas

Optical instruments, gas meter housings


30% Glass Bead


You are viewing a generic polymer page, for more information please contact the suppliers or Matmatch, or use our Search under the following link to find more specific grades and formulations based on your application:

Polymer Advanced Search

Processing methods

Injection molding