EN 10088-1 Grade X6Cr17 soft annealed (+A)

Want to keep this datasheet? Save it now in your required format

Description

Material X6Cr17 is comparable to X 6 Cr 17 acc. to DIN 17440 : 1985-07. This material is a ferritic steel (17% Cr), largely resistant in water, steam, weak acids and bases, oxidizing acids (e.g. nitric acid). As a cold rolled sheet used for washing machines and kitchen parts, silverware, facings, trim strips, bumper, hub caps, in food and nitric acid industry. Good deep drawing and burnishing suitabiliy for non welded parts. Application temperature up to 300 °C (for the comparable DIN-material). X6Cr17 is applicated in construction trade for decorative components, such as racks and furniture frames, safe deposit boxes, signs. A metallic clean surface represents a basic requirement for a good corrosion resistance. X6Cr17 is applicated cold rolled resp. ground or polished. Resistance to intercrystalline corrosion in delivery corrosion but not in welded condition. The material is acc. to DIN EN 10095 : 1999-05 allowed to be used as heat resistant steel.

Related Standards

EN 10088-1

Equivalent Materials

This material data has been provided by WIAM.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value
Density	20.0 °C	7.7 g/cm³ Show Material materials with Density of 7.7 g/cm³

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	20.0 °C	220 GPa Show Material materials with Elastic modulus of 220 GPa
	100.0 °C	215 GPa Show Material materials with Elastic modulus of 215 GPa
	200.0 °C	210 GPa Show Material materials with Elastic modulus of 210 GPa
	300.0 °C	205 GPa Show Material materials with Elastic modulus of 205 GPa
	400.0 °C	195 GPa Show Material materials with Elastic modulus of 195 GPa

Elongation	20.0 °C	8 - 20 % Show Material materials with Elongation of 8 - 20 %
Elongation A80	20.0 °C	18 - 20 % Show Material materials with Elongation A80 of 18 - 20 %
Elongation A80, transverse	20.0 °C	18 - 20 % Show Material materials with Elongation A80, transverse of 18 - 20 %
Elongation, transverse	20.0 °C	18 - 20 % Show Material materials with Elongation, transverse of 18 - 20 %
Hardness, Brinell	20.0 °C	200 [-] Show Material materials with Hardness, Brinell of 200 [-]
Poisson's ratio	23.0 °C	0.3 [-] Show Material materials with Poisson's ratio of 0.3 [-]	Typical for Ferritic Stainless Steel
Shear modulus	23.0 °C	77 GPa Show Material materials with Shear modulus of 77 GPa	Typical for Ferritic Stainless Steel
Tensile strength	20.0 °C	400 - 950 MPa Show Material materials with Tensile strength of 400 - 950 MPa
Tensile strength, transverse	20.0 °C	430 - 630 MPa Show Material materials with Tensile strength, transverse of 430 - 630 MPa
Yield strength Rp0.2	20.0 °C	200 - 320 MPa Show Material materials with Yield strength Rp0.2 of 200 - 320 MPa
	100.0 °C	220 MPa Show Material materials with Yield strength Rp0.2 of 220 MPa
	150.0 °C	215 MPa Show Material materials with Yield strength Rp0.2 of 215 MPa
	200.0 °C	210 MPa Show Material materials with Yield strength Rp0.2 of 210 MPa
	250.0 °C	205 MPa Show Material materials with Yield strength Rp0.2 of 205 MPa
	300.0 °C	200 MPa Show Material materials with Yield strength Rp0.2 of 200 MPa
	350.0 °C	195 MPa Show Material materials with Yield strength Rp0.2 of 195 MPa
	400.0 °C	190 - 196 MPa Show Material materials with Yield strength Rp0.2 of 190 - 196 MPa
	Unlock all property charts
Yield strength Rp0.2, transverse	20.0 °C	260 - 280 MPa Show Material materials with Yield strength Rp0.2, transverse of 260 - 280 MPa

Thermal

Property	Temperature	Value	Comment
Coefficient of thermal expansion	100.0 °C	1E-5 1/K Show Material materials with Coefficient of thermal expansion of 1E-5 1/K
	200.0 °C	1E-5 1/K Show Material materials with Coefficient of thermal expansion of 1E-5 1/K
	300.0 °C	1.05E-5 1/K Show Material materials with Coefficient of thermal expansion of 1.05E-5 1/K
	400.0 °C	1.05E-5 1/K Show Material materials with Coefficient of thermal expansion of 1.05E-5 1/K
	500.0 °C	1.1E-5 1/K Show Material materials with Coefficient of thermal expansion of 1.1E-5 1/K
	Unlock all property charts
Max service temperature, long		0 - 300 °C Show Material materials with Max service temperature, long of 0 - 300 °C
Melting point		1425 - 1530 °C Show Material materials with Melting point of 1425 - 1530 °C	Typical for Ferritic Stainless Steel
Specific heat capacity	20.0 °C	460 J/(kg·K) Show Material materials with Specific heat capacity of 460 J/(kg·K)
Thermal conductivity	20.0 °C	25 W/(m·K) Show Material materials with Thermal conductivity of 25 W/(m·K)

Electrical

Property	Temperature	Value
Electrical resistivity	20.0 °C	6E-7 Ω·m Show Material materials with Electrical resistivity of 6E-7 Ω·m

Chemical properties

Property	Value
Carbon	0.08 % Show Material materials with Carbon of 0.08 %
Chromium	16 - 18 % Show Material materials with Chromium of 16 - 18 %
Manganese	1 % Show Material materials with Manganese of 1 %
Phosphorus	0.04 % Show Material materials with Phosphorus of 0.04 %
Silicon	1 % Show Material materials with Silicon of 1 %
Sulfur	0.015 % Show Material materials with Sulfur of 0.015 %

Looking for suppliers of this material? Click to see 10 supplier of EN 10088-1 Grade X6Cr17 soft annealed (+A) on Matmatch

EN 10088-1 Grade X6Cr17 soft annealed (+A)

Description

Related Standards

Equivalent Materials

Ashby charts

There are 7 other suppliers for this grade.

Preview all suppliers

Suggested reading

Properties