EN 10088-1 Grade X1CrNiMoCuN25-25-5 solution annealed (+AT)

Want to keep this datasheet? Save it now in your required format

Description

The austenitic material X1CrNiMoCuN25-25-5 is used in solution annealed condition in the form of warm rolled sheet, rods, wire rods and profiles. It is resistant to intercrystalline corrosion also in sensitized condition.

Related Standards

EN 10088-1

Equivalent Materials

This material data has been provided by WIAM.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value
Density	20.0 °C	8.1 g/cm³ Show Material materials with Density of 8.1 g/cm³

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	20.0 °C	195 GPa Show Material materials with Elastic modulus of 195 GPa
	100.0 °C	190 GPa Show Material materials with Elastic modulus of 190 GPa
	200.0 °C	182 GPa Show Material materials with Elastic modulus of 182 GPa
	300.0 °C	174 GPa Show Material materials with Elastic modulus of 174 GPa
	400.0 °C	166 GPa Show Material materials with Elastic modulus of 166 GPa
	500.0 °C	158 GPa Show Material materials with Elastic modulus of 158 GPa

Elongation	20.0 °C	35 % Show Material materials with Elongation of 35 %
Elongation A80, transverse	20.0 °C	40 % Show Material materials with Elongation A80, transverse of 40 %
Elongation, transverse	20.0 °C	30 - 40 % Show Material materials with Elongation, transverse of 30 - 40 %
Hardness, Brinell	20.0 °C	250 [-] Show Material materials with Hardness, Brinell of 250 [-]
Hardness, Brinell, trans	20.0 °C	250 [-] Show Material materials with Hardness, Brinell, trans of 250 [-]
Poisson's ratio	23.0 °C	0.3 [-] Show Material materials with Poisson's ratio of 0.3 [-]	Typical for Austenitic Stainless Steel
Shear modulus	23.0 °C	77 GPa Show Material materials with Shear modulus of 77 GPa	Typical for Austenitic Stainless Steel
Tensile strength	20.0 °C	600 - 800 MPa Show Material materials with Tensile strength of 600 - 800 MPa
Tensile strength, transverse	20.0 °C	600 - 800 MPa Show Material materials with Tensile strength, transverse of 600 - 800 MPa
Yield strength Rp0.2	20.0 °C	300 MPa Show Material materials with Yield strength Rp0.2 of 300 MPa
	100.0 °C	240 MPa Show Material materials with Yield strength Rp0.2 of 240 MPa
	150.0 °C	220 MPa Show Material materials with Yield strength Rp0.2 of 220 MPa
	200.0 °C	200 MPa Show Material materials with Yield strength Rp0.2 of 200 MPa
	250.0 °C	190 MPa Show Material materials with Yield strength Rp0.2 of 190 MPa
	300.0 °C	180 MPa Show Material materials with Yield strength Rp0.2 of 180 MPa
	350.0 °C	175 MPa Show Material materials with Yield strength Rp0.2 of 175 MPa
	400.0 °C	170 MPa Show Material materials with Yield strength Rp0.2 of 170 MPa
	Unlock all property charts
Yield strength Rp0.2, transverse	20.0 °C	290 - 300 MPa Show Material materials with Yield strength Rp0.2, transverse of 290 - 300 MPa
Yield strength Rp1.0	20.0 °C	340 MPa Show Material materials with Yield strength Rp1.0 of 340 MPa
	100.0 °C	270 MPa Show Material materials with Yield strength Rp1.0 of 270 MPa
	150.0 °C	250 MPa Show Material materials with Yield strength Rp1.0 of 250 MPa
	200.0 °C	230 MPa Show Material materials with Yield strength Rp1.0 of 230 MPa
	250.0 °C	220 MPa Show Material materials with Yield strength Rp1.0 of 220 MPa
	300.0 °C	210 MPa Show Material materials with Yield strength Rp1.0 of 210 MPa
	350.0 °C	205 MPa Show Material materials with Yield strength Rp1.0 of 205 MPa
	400.0 °C	200 MPa Show Material materials with Yield strength Rp1.0 of 200 MPa
	Unlock all property charts
Yield strength Rp1.0, transverse	20.0 °C	330 - 340 MPa Show Material materials with Yield strength Rp1.0, transverse of 330 - 340 MPa

Thermal

Property	Temperature	Value	Comment
Coefficient of thermal expansion	100.0 °C	1.5E-5 1/K Show Material materials with Coefficient of thermal expansion of 1.5E-5 1/K
	300.0 °C	1.65E-5 1/K Show Material materials with Coefficient of thermal expansion of 1.65E-5 1/K
	Unlock all property charts
Melting point		1230 - 1480 °C Show Material materials with Melting point of 1230 - 1480 °C	Typical for Austenitic Stainless Steel
Specific heat capacity	20.0 °C	500 J/(kg·K) Show Material materials with Specific heat capacity of 500 J/(kg·K)
Thermal conductivity	20.0 °C	14 W/(m·K) Show Material materials with Thermal conductivity of 14 W/(m·K)

Electrical

Property	Temperature	Value
Electrical resistivity	20.0 °C	8.5E-7 Ω·m Show Material materials with Electrical resistivity of 8.5E-7 Ω·m

Chemical properties

Property	Value
Carbon	0.02 % Show Material materials with Carbon of 0.02 %
Chromium	24 - 26 % Show Material materials with Chromium of 24 - 26 %
Copper	1 - 2 % Show Material materials with Copper of 1 - 2 %
Manganese	2 % Show Material materials with Manganese of 2 %
Molybdenum	4.7 - 5.7 % Show Material materials with Molybdenum of 4.7 - 5.7 %
Nickel	24 - 27 % Show Material materials with Nickel of 24 - 27 %
Nitrogen	0.17 - 0.25 % Show Material materials with Nitrogen of 0.17 - 0.25 %
Phosphorus	0.03 % Show Material materials with Phosphorus of 0.03 %
Silicon	0.7 % Show Material materials with Silicon of 0.7 %
Sulfur	0.01 % Show Material materials with Sulfur of 0.01 %