SEW 520 Grade G18CrMnMo5-5 quenched and tempered (+QT)

Want to keep this datasheet? Save it now in your required format

Description

The material G18CrMnMo5-5 is suitable for fusion welding and is considered to have a good weldability, since it has been successfully used with good results in cast - welded constructions, especially in combination with rolling mill and forged products made from quenchhardened high-strength fine-grain structural steels. In addition to high values for the 0.2% proof strength, the material distinguishes itself by relatively high values of the notch impact energy at the same time. Application: is chiefly applied in the mechanical engineering and the vehicle manufacturing, furthermore in the plant engineering and crane construction, in the offshore-technology as well as in the underground mining at climatically determined temperatures.

Related Standards

SEW 520

Equivalent Materials

This material data has been provided by WIAM.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	7.8 - 7.9 g/cm³ Show Material materials with Density of 7.8 - 7.9 g/cm³	Typical for Chromium Molybdenum Steel

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	200 - 215 GPa Show Material materials with Elastic modulus of 200 - 215 GPa	Typical for Chromium Molybdenum Steel
Elongation	20.0 °C	12 % Show Material materials with Elongation of 12 %
Poisson's ratio	23.0 °C	0.29 [-] Show Material materials with Poisson's ratio of 0.29 [-]	Typical for Chromium Molybdenum Steel
Tensile strength	20.0 °C	730 - 970 MPa Show Material materials with Tensile strength of 730 - 970 MPa
Yield strength	20.0 °C	600 - 700 MPa Show Material materials with Yield strength of 600 - 700 MPa

Thermal

Property	Temperature	Value	Comment
Coefficient of thermal expansion	23.0 °C	1.1E-5 - 1.4E-5 1/K Show Material materials with Coefficient of thermal expansion of 1.1E-5 - 1.4E-5 1/K	Typical for Chromium Molybdenum Steel
Melting point		1382 - 1529 °C Show Material materials with Melting point of 1382 - 1529 °C	Typical for Chromium Molybdenum Steel
Specific heat capacity	23.0 °C	448 - 502 J/(kg·K) Show Material materials with Specific heat capacity of 448 - 502 J/(kg·K)	Typical for Chromium Molybdenum Steel
Thermal conductivity	23.0 °C	36 - 43 W/(m·K) Show Material materials with Thermal conductivity of 36 - 43 W/(m·K)	Typical for Chromium Molybdenum Steel

Chemical properties

Property	Value
Carbon	0.15 - 0.21 % Show Material materials with Carbon of 0.15 - 0.21 %
Chromium	1.2 - 1.5 % Show Material materials with Chromium of 1.2 - 1.5 %
Manganese	1.2 - 1.6 % Show Material materials with Manganese of 1.2 - 1.6 %
Molybdenum	0.45 - 0.55 % Show Material materials with Molybdenum of 0.45 - 0.55 %
Phosphorus	0.02 % Show Material materials with Phosphorus of 0.02 %
Silicon	0.6 % Show Material materials with Silicon of 0.6 %
Sulfur	0.015 % Show Material materials with Sulfur of 0.015 %