EN 10025-3 Grade S355NL normalized or normalized formed (+N)

View suppliers (22)
Want to keep this datasheet? Save it now in your required format

Description

The unalloyed, normalised/normalising rolled quality steel S355NL is a weldable fine-grained steel with a min. yield point of 355 N/mm². The steel is applicated in normalized condition for several types of welded constructions such as fixed and movable storage container, high-pressure pipes, bridge and load-bearing constructions etc. Cold forming: Suitability for cold bending, folding, cold flanging or cold welting has to be agreed. For sheet, strip and wide flat steel in normalized condition, for nominal thickness (s) up to 16 mm can be warranted the following bending radius values: longitudinal: 2,5 x s transverse: 2,0 x s Sheet and strip of nominal thicknesses < 8 mm for cold forming of sections is available on arrangement (e.g. for production of hollow sections). Requirements regarding hot dip zinc coating by arrangement.

Related Standards

Equivalent Materials

This material data has been provided by WIAM.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueConditionRelated StandardsShape

Density

20 °C

7.83 g/cm³

Show Material materials with Density of 7.83 g/cm³

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Mechanical

PropertyTemperatureValueConditionRelated StandardsShapeComment

Elastic modulus

-100 °C

217 GPa

Show Material materials with Elastic modulus of 217 GPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

212 GPa

Show Material materials with Elastic modulus of 212 GPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

100 °C

207 GPa

Show Material materials with Elastic modulus of 207 GPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

200 °C

199 GPa

Show Material materials with Elastic modulus of 199 GPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

300 °C

192 GPa

Show Material materials with Elastic modulus of 192 GPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

400 °C

184 GPa

Show Material materials with Elastic modulus of 184 GPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

500 °C

175 GPa

Show Material materials with Elastic modulus of 175 GPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

600 °C

164 GPa

Show Material materials with Elastic modulus of 164 GPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Elongation

17.0 %

Show Material materials with Elongation of 17.0 %

Predicted Value, A80 Transverse

17.3 %

Show Material materials with Elongation of 17.3 %

Predicted Value, A80

17.9 %

Show Material materials with Elongation of 17.9 %

Predicted Value, A200

19.6 %

Show Material materials with Elongation of 19.6 %

Predicted Value, Transverse

21.1 %

Show Material materials with Elongation of 21.1 %

Predicted Value, A5

21.4 %

Show Material materials with Elongation of 21.4 %

Predicted Value, A50

20 °C

20 %

Show Material materials with Elongation of 20 %

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Flat

20 °C

21 %

Show Material materials with Elongation of 21 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

20 °C

22 %

Show Material materials with Elongation of 22 %

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat, Rod, Wire

Hardness, Brinell

243 [-]

Show Material materials with Hardness, Brinell of 243 [-]

Predicted Value, Transverse

Poisson's ratio

0.29 [-]

Show Material materials with Poisson's ratio of 0.29 [-]

Typical for Low Carbon Steel

Reduction of area

43.8 %

Show Material materials with Reduction of area of 43.8 %

Predicted Value, Transverse

52.2 %

Show Material materials with Reduction of area of 52.2 %

Predicted Value

Shear modulus

82 GPa

Show Material materials with Shear modulus of 82 GPa

Typical for Low Carbon Steel

Shear strength

513.5 MPa

Show Material materials with Shear strength of 513.5 MPa

Predicted Value

Tensile strength

20 °C

440 - 590 MPa

Show Material materials with Tensile strength of 440 - 590 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Flat

20 °C

450 - 630 MPa

Show Material materials with Tensile strength of 450 - 630 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat, Rod, Wire

20 °C

450 - 600 MPa

Show Material materials with Tensile strength of 450 - 600 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat, Rod, Wire

20 °C

470 - 630 MPa

Show Material materials with Tensile strength of 470 - 630 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat, Rod, Wire

20 °C

470 - 600 MPa

Show Material materials with Tensile strength of 470 - 600 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat, Rod, Wire

Yield strength

254.1 MPa

Show Material materials with Yield strength of 254.1 MPa

Predicted Value, RP1

301.2 MPa

Show Material materials with Yield strength of 301.2 MPa

Predicted Value, RP1 Transverse

360.3 MPa

Show Material materials with Yield strength of 360.3 MPa

Predicted Value, RP02

376.2 MPa

Show Material materials with Yield strength of 376.2 MPa

Predicted Value, Transverse

453.9 MPa

Show Material materials with Yield strength of 453.9 MPa

Predicted Value, RP02 Transverse

462.2 MPa

Show Material materials with Yield strength of 462.2 MPa

Predicted Value, RP002

465.6 MPa

Show Material materials with Yield strength of 465.6 MPa

Predicted Value, RP05

20 °C

275 MPa

Show Material materials with Yield strength of 275 MPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

20 °C

285 MPa

Show Material materials with Yield strength of 285 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Flat, Strip, Rod, Wire

20 °C

295 MPa

Show Material materials with Yield strength of 295 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat, Rod, Wire

20 °C

315 MPa

Show Material materials with Yield strength of 315 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat, Rod, Wire

20 °C

325 MPa

Show Material materials with Yield strength of 325 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat, Rod, Wire

20 °C

335 MPa

Show Material materials with Yield strength of 335 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat, Rod, Wire

20 °C

345 MPa

Show Material materials with Yield strength of 345 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat, Rod, Wire

20 °C

355 MPa

Show Material materials with Yield strength of 355 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat, Rod, Wire

Thermal

PropertyTemperatureValueConditionRelated StandardsShapeComment

Coefficient of thermal expansion

-100 °C

1.08e-05 1/K

Show Material materials with Coefficient of thermal expansion of 1.08e-05 1/K

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

1.19e-05 1/K

Show Material materials with Coefficient of thermal expansion of 1.19e-05 1/K

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

100 °C

1.25e-05 1/K

Show Material materials with Coefficient of thermal expansion of 1.25e-05 1/K

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

200 °C

1.3e-05 1/K

Show Material materials with Coefficient of thermal expansion of 1.3e-05 1/K

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

300 °C

1.36e-05 1/K

Show Material materials with Coefficient of thermal expansion of 1.36e-05 1/K

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

400 °C

1.41e-05 1/K

Show Material materials with Coefficient of thermal expansion of 1.41e-05 1/K

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

500 °C

1.45e-05 1/K

Show Material materials with Coefficient of thermal expansion of 1.45e-05 1/K

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

600 °C

1.49e-05 1/K

Show Material materials with Coefficient of thermal expansion of 1.49e-05 1/K

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Max service temperature

368.7 °C

Show Material materials with Max service temperature of 368.7 °C

Predicted Value, Long

500 °C

Show Material materials with Max service temperature of 500 °C

Typical for Carbon Steel

Melting point

1480 - 1526 °C

Show Material materials with Melting point of 1480 - 1526 °C

Typical for Low Carbon Steel

Specific heat capacity

-100 °C

423 J/(kg·K)

Show Material materials with Specific heat capacity of 423 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

461 J/(kg·K)

Show Material materials with Specific heat capacity of 461 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

100 °C

479 J/(kg·K)

Show Material materials with Specific heat capacity of 479 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

200 °C

499 J/(kg·K)

Show Material materials with Specific heat capacity of 499 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

300 °C

517 J/(kg·K)

Show Material materials with Specific heat capacity of 517 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

400 °C

536 J/(kg·K)

Show Material materials with Specific heat capacity of 536 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

500 °C

558 J/(kg·K)

Show Material materials with Specific heat capacity of 558 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

600 °C

587 J/(kg·K)

Show Material materials with Specific heat capacity of 587 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Thermal conductivity

-100 °C

37.6 W/(m·K)

Show Material materials with Thermal conductivity of 37.6 W/(m·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

42.2 W/(m·K)

Show Material materials with Thermal conductivity of 42.2 W/(m·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

100 °C

43.2 W/(m·K)

Show Material materials with Thermal conductivity of 43.2 W/(m·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

200 °C

42.9 W/(m·K)

Show Material materials with Thermal conductivity of 42.9 W/(m·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

300 °C

41.2 W/(m·K)

Show Material materials with Thermal conductivity of 41.2 W/(m·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

400 °C

39.1 W/(m·K)

Show Material materials with Thermal conductivity of 39.1 W/(m·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

500 °C

36.6 W/(m·K)

Show Material materials with Thermal conductivity of 36.6 W/(m·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

600 °C

34.1 W/(m·K)

Show Material materials with Thermal conductivity of 34.1 W/(m·K)

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Thermal diffusivity

-100 °C

12.9 mm²/s

Show Material materials with Thermal diffusivity of 12.9 mm²/s

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

11.7 mm²/s

Show Material materials with Thermal diffusivity of 11.7 mm²/s

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

100 °C

11.2 mm²/s

Show Material materials with Thermal diffusivity of 11.2 mm²/s

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

200 °C

10.3 mm²/s

Show Material materials with Thermal diffusivity of 10.3 mm²/s

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

300 °C

9.4 mm²/s

Show Material materials with Thermal diffusivity of 9.4 mm²/s

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

400 °C

8.3 mm²/s

Show Material materials with Thermal diffusivity of 8.3 mm²/s

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

500 °C

7.1 mm²/s

Show Material materials with Thermal diffusivity of 7.1 mm²/s

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

600 °C

5.7 mm²/s

Show Material materials with Thermal diffusivity of 5.7 mm²/s

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Electrical

PropertyTemperatureValueConditionRelated StandardsShapeComment

Electrical conductivity

5 S/m

Show Material materials with Electrical conductivity of 5 S/m

Predicted Value

Electrical resistivity

-100 °C

1.82e-07 Ω·m

Show Material materials with Electrical resistivity of 1.82e-07 Ω·m

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

2.47e-07 Ω·m

Show Material materials with Electrical resistivity of 2.47e-07 Ω·m

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

100 °C

2.96e-07 Ω·m

Show Material materials with Electrical resistivity of 2.96e-07 Ω·m

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

200 °C

3.68e-07 Ω·m

Show Material materials with Electrical resistivity of 3.68e-07 Ω·m

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

300 °C

4.55e-07 Ω·m

Show Material materials with Electrical resistivity of 4.55e-07 Ω·m

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

400 °C

5.56e-07 Ω·m

Show Material materials with Electrical resistivity of 5.56e-07 Ω·m

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

500 °C

6.75e-07 Ω·m

Show Material materials with Electrical resistivity of 6.75e-07 Ω·m

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

600 °C

8.13e-07 Ω·m

Show Material materials with Electrical resistivity of 8.13e-07 Ω·m

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Magnetic

PropertyValueComment

Curie temperature

770 °C

Show Material materials with Curie temperature of 770 °C

Typical for Low Carbon Steel

Chemical properties

PropertyValueConditionRelated StandardsShape

Aluminium

0.02 %

Show Material materials with Aluminium of 0.02 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Carbon

0.18 %

Show Material materials with Carbon of 0.18 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Chromium

0.3 %

Show Material materials with Chromium of 0.3 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Copper

0.35 %

Show Material materials with Copper of 0.35 %

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat

0.55 %

Show Material materials with Copper of 0.55 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

Manganese

0.9 - 1.65 %

Show Material materials with Manganese of 0.9 - 1.65 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Molybdenum

0.1 %

Show Material materials with Molybdenum of 0.1 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Nickel

0.5 %

Show Material materials with Nickel of 0.5 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Niobium

0.05 %

Show Material materials with Niobium of 0.05 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Nitrogen

0.015 %

Show Material materials with Nitrogen of 0.015 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Phosphorus

0.025 %

Show Material materials with Phosphorus of 0.025 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

0.03 %

Show Material materials with Phosphorus of 0.03 %

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat

Silicon

0.5 %

Show Material materials with Silicon of 0.5 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Sulfur

0.02 %

Show Material materials with Sulfur of 0.02 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

0.025 %

Show Material materials with Sulfur of 0.025 %

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat

Titanium

0.03 %

Show Material materials with Titanium of 0.03 %

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat

0.05 %

Show Material materials with Titanium of 0.05 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

Vanadium

0.12 %

Show Material materials with Vanadium of 0.12 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Technological properties

Property
Supplier Disclaimer

The given information is a rough description and some properties can depend on various factors such as product thickness. Please contact the supplier or refer to the related norm or standard for further information.