EN 10025-3 Grade S460N normalized or normalized formed (+N)

View suppliers (14)
Want to keep this datasheet? Save it now in your required format

Description

The alloyed, normalised/normalising rolled high grade steel S460N is a weldable fine-grained steel with a min. yield point of 460 N/mm². The steel is applicated in normalized condition for several types of welded constructions such as fixed and movable storage container, high-pressure pipes, bridge and load-bearing constructions etc. Cold forming: Suitability for cold bending, folding, cold flanging or cold welting has to be agreed. For sheet, strip and wide flat steel in normalized condition, for nominal thickness (s) up to 16 mm can be warranted the following bending radius values: longitudinal: 5 x s transverse: 4 x s Sheet and strip of nominal thicknesses < 8 mm for cold forming of sections is available on arrangement (e.g. for production of hollow sections). Requirements regarding hot dip zinc coating by arrangement.

Related Standards

Equivalent Materials

This material data has been provided by WIAM.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValueComment

Density

7.8 g/cm³

Show Material materials with Density of 7.8 g/cm³

Typical for Steel

Mechanical

PropertyTemperatureValueConditionRelated StandardsShapeComment

Elastic modulus

190 - 210 GPa

Show Material materials with Elastic modulus of 190 - 210 GPa

Typical for Steel

Elongation

15.7 %

Show Material materials with Elongation of 15.7 %

Predicted Value, A80

15.7 %

Show Material materials with Elongation of 15.7 %

Predicted Value, A200

17.5 %

Show Material materials with Elongation of 17.5 %

Predicted Value, Transverse

18.2 %

Show Material materials with Elongation of 18.2 %

Predicted Value, A80 Transverse

20.9 %

Show Material materials with Elongation of 20.9 %

Predicted Value, A5

23.3 %

Show Material materials with Elongation of 23.3 %

Predicted Value, A50

20 °C

16 %

Show Material materials with Elongation of 16 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

20 °C

17 %

Show Material materials with Elongation of 17 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Hardness, Brinell

251 [-]

Show Material materials with Hardness, Brinell of 251 [-]

Predicted Value, Transverse

Poisson's ratio

0.3 [-]

Show Material materials with Poisson's ratio of 0.3 [-]

Typical for Steel

Reduction of area

43.8 %

Show Material materials with Reduction of area of 43.8 %

Predicted Value, Transverse

51.5 %

Show Material materials with Reduction of area of 51.5 %

Predicted Value

Shear modulus

80.3 GPa

Show Material materials with Shear modulus of 80.3 GPa

Predicted Value

Shear strength

527.8 MPa

Show Material materials with Shear strength of 527.8 MPa

Predicted Value

Tensile strength

20 °C

510 - 720 MPa

Show Material materials with Tensile strength of 510 - 720 MPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

20 °C

510 - 700 MPa

Show Material materials with Tensile strength of 510 - 700 MPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

20 °C

510 - 690 MPa

Show Material materials with Tensile strength of 510 - 690 MPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

20 °C

520 - 690 MPa

Show Material materials with Tensile strength of 520 - 690 MPa

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Flat

20 °C

530 - 720 MPa

Show Material materials with Tensile strength of 530 - 720 MPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

20 °C

530 - 700 MPa

Show Material materials with Tensile strength of 530 - 700 MPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

20 °C

530 - 690 MPa

Show Material materials with Tensile strength of 530 - 690 MPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

20 °C

550 - 720 MPa

Show Material materials with Tensile strength of 550 - 720 MPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

550 - 700 MPa

Show Material materials with Tensile strength of 550 - 700 MPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

20 °C

550 - 690 MPa

Show Material materials with Tensile strength of 550 - 690 MPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

Yield strength

260.4 MPa

Show Material materials with Yield strength of 260.4 MPa

Predicted Value, RP1

319.7 MPa

Show Material materials with Yield strength of 319.7 MPa

Predicted Value, RP1 Transverse

408.4 MPa

Show Material materials with Yield strength of 408.4 MPa

Predicted Value, Transverse

430.6 MPa

Show Material materials with Yield strength of 430.6 MPa

Predicted Value, RP02

470 MPa

Show Material materials with Yield strength of 470 MPa

Predicted Value, RP02 Transverse

495.2 MPa

Show Material materials with Yield strength of 495.2 MPa

Predicted Value, RP002

526.7 MPa

Show Material materials with Yield strength of 526.7 MPa

Predicted Value, RP05

20 °C

370 MPa

Show Material materials with Yield strength of 370 MPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

20 °C

380 MPa

Show Material materials with Yield strength of 380 MPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

20 °C

400 MPa

Show Material materials with Yield strength of 400 MPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

410 MPa

Show Material materials with Yield strength of 410 MPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

430 MPa

Show Material materials with Yield strength of 430 MPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

440 MPa

Show Material materials with Yield strength of 440 MPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

460 MPa

Show Material materials with Yield strength of 460 MPa

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Thermal

PropertyValueComment

Coefficient of thermal expansion

11.82 1/K

Show Material materials with Coefficient of thermal expansion of 11.82 1/K

Predicted Value

Specific heat capacity

454.3 J/(kg·K)

Show Material materials with Specific heat capacity of 454.3 J/(kg·K)

Predicted Value

Thermal conductivity

38.3 W/(m·K)

Show Material materials with Thermal conductivity of 38.3 W/(m·K)

Predicted Value

Electrical

PropertyValueComment

Electrical conductivity

5 S/m

Show Material materials with Electrical conductivity of 5 S/m

Predicted Value

Electrical resistivity

35 Ω·m

Show Material materials with Electrical resistivity of 35 Ω·m

Predicted Value

Chemical properties

PropertyValueConditionRelated StandardsShape

Aluminium

0.02 %

Show Material materials with Aluminium of 0.02 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Carbon

0.2 %

Show Material materials with Carbon of 0.2 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Chromium

0.3 %

Show Material materials with Chromium of 0.3 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Copper

0.55 %

Show Material materials with Copper of 0.55 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

0.7 %

Show Material materials with Copper of 0.7 %

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat

Manganese

1 - 1.7 %

Show Material materials with Manganese of 1 - 1.7 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Molybdenum

0.1 %

Show Material materials with Molybdenum of 0.1 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Nickel

0.8 %

Show Material materials with Nickel of 0.8 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Niobium

0.05 %

Show Material materials with Niobium of 0.05 %

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat

0.2 %

Show Material materials with Niobium of 0.2 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

Nitrogen

0.025 %

Show Material materials with Nitrogen of 0.025 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Phosphorus

0.03 %

Show Material materials with Phosphorus of 0.03 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

0.035 %

Show Material materials with Phosphorus of 0.035 %

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat

Silicon

0.6 %

Show Material materials with Silicon of 0.6 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire, Bar

Sulfur

0.025 %

Show Material materials with Sulfur of 0.025 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

0.03 %

Show Material materials with Sulfur of 0.03 %

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat

Titanium

0.03 %

Show Material materials with Titanium of 0.03 %

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat

0.05 %

Show Material materials with Titanium of 0.05 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

Vanadium

0.05 %

Show Material materials with Vanadium of 0.05 %

normalized or normalized formed (+N)

EN 10025-3, EN 10113-2

Strip, Sheet, Flat, Rod, Wire

0.2 %

Show Material materials with Vanadium of 0.2 %

normalized or normalized formed (+N)

EN 10113-2, EN 10025-3

Sheet, Strip, Bar, Flat

Technological properties

Property
Supplier Disclaimer

The given information is a rough description and some properties can depend on various factors such as product thickness. Please contact the supplier or refer to the related norm or standard for further information.