EN 10025-5 Grade S355J0W normalized or normalized formed (+N)

View suppliers (8)
Want to keep this datasheet? Save it now in your required format

Description

The weather resistant steel S355J2WP with improved atmospheric corrosion resistance (by generation of an conversion coating) has a minimum yield strength of 355 N/mm². It is applicated for welded, screwed and riveted constructions, e.g. structural engineering, bridge building, tank construction, exhaust systems, vehicle construction, toolbuilding. The grid rate have to considered in the dimensioning process. An conventional surface protection is recommend at polluted air and necessary at long-time water wetting, constant wetness or close to the sea. Unweathered areas with condensate generation have to be adequate ventilated. Before welding the coating have to be removed in a distance of 10 - 20 mm from the welding edge. With increasing thickness, strength and carbon equivalent the occurence of cold cracks in the welding zone is possible. The recommendation of the EURONORM Information No. 2 (EN 1011-2) have to considered.

Related Standards

Equivalent Materials

This material data has been provided by WIAM.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValueComment

Density

7.8 g/cm³

Show Material materials with Density of 7.8 g/cm³

Typical for Steel

Mechanical

PropertyTemperatureValueConditionRelated StandardsShapeComment

Elastic modulus

190 - 210 GPa

Show Material materials with Elastic modulus of 190 - 210 GPa

Typical for Steel

Elongation

17.4 %

Show Material materials with Elongation of 17.4 %

Predicted Value, A200

21.8 %

Show Material materials with Elongation of 21.8 %

Predicted Value, A5

23.1 %

Show Material materials with Elongation of 23.1 %

Predicted Value, A50

20 °C

14 %

Show Material materials with Elongation of 14 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

A80 Transverse

20 °C

15 %

Show Material materials with Elongation of 15 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

A80 Transverse

20 °C

16 %

Show Material materials with Elongation of 16 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

A80 Transverse

20 °C

16 %

Show Material materials with Elongation of 16 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

A80

20 °C

17 %

Show Material materials with Elongation of 17 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

A80

20 °C

18 %

Show Material materials with Elongation of 18 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

A80

20 °C

18 %

Show Material materials with Elongation of 18 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Transverse

20 °C

18 %

Show Material materials with Elongation of 18 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

20 °C

19 %

Show Material materials with Elongation of 19 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Transverse

20 °C

20 %

Show Material materials with Elongation of 20 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Transverse

20 °C

20 %

Show Material materials with Elongation of 20 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire

20 °C

21 %

Show Material materials with Elongation of 21 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire

20 °C

22 %

Show Material materials with Elongation of 22 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire

Poisson's ratio

0.3 [-]

Show Material materials with Poisson's ratio of 0.3 [-]

Typical for Steel

Tensile strength

20 °C

450 - 680 MPa

Show Material materials with Tensile strength of 450 - 680 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

450 - 630 MPa

Show Material materials with Tensile strength of 450 - 630 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

450 - 600 MPa

Show Material materials with Tensile strength of 450 - 600 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

450 - 680 MPa

Show Material materials with Tensile strength of 450 - 680 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

20 °C

450 - 630 MPa

Show Material materials with Tensile strength of 450 - 630 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

20 °C

450 - 600 MPa

Show Material materials with Tensile strength of 450 - 600 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

20 °C

470 - 680 MPa

Show Material materials with Tensile strength of 470 - 680 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

470 - 630 MPa

Show Material materials with Tensile strength of 470 - 630 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

470 - 600 MPa

Show Material materials with Tensile strength of 470 - 600 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

470 - 680 MPa

Show Material materials with Tensile strength of 470 - 680 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

20 °C

470 - 630 MPa

Show Material materials with Tensile strength of 470 - 630 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

20 °C

470 - 600 MPa

Show Material materials with Tensile strength of 470 - 600 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

20 °C

490 - 680 MPa

Show Material materials with Tensile strength of 490 - 680 MPa

normalized or normalized formed (+N)

EN 10155, EN 10025-1, EN 10025-5

Bar, Sheet, Strip, Flat

20 °C

490 - 630 MPa

Show Material materials with Tensile strength of 490 - 630 MPa

normalized or normalized formed (+N)

EN 10155, EN 10025-1, EN 10025-5

Bar, Sheet, Strip, Flat

20 °C

510 - 680 MPa

Show Material materials with Tensile strength of 510 - 680 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

510 - 630 MPa

Show Material materials with Tensile strength of 510 - 630 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

510 - 600 MPa

Show Material materials with Tensile strength of 510 - 600 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

510 - 680 MPa

Show Material materials with Tensile strength of 510 - 680 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

510 - 630 MPa

Show Material materials with Tensile strength of 510 - 630 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

510 - 600 MPa

Show Material materials with Tensile strength of 510 - 600 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Yield strength

261 MPa

Show Material materials with Yield strength of 261 MPa

Predicted Value, RP1

286.6 MPa

Show Material materials with Yield strength of 286.6 MPa

Predicted Value, RP1 Transverse

390 MPa

Show Material materials with Yield strength of 390 MPa

Predicted Value, RP02

401.5 MPa

Show Material materials with Yield strength of 401.5 MPa

Predicted Value, RP05

406.7 MPa

Show Material materials with Yield strength of 406.7 MPa

Predicted Value, RP02 Transverse

468.6 MPa

Show Material materials with Yield strength of 468.6 MPa

Predicted Value, RP002

20 °C

295 MPa

Show Material materials with Yield strength of 295 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

295 MPa

Show Material materials with Yield strength of 295 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

20 °C

315 MPa

Show Material materials with Yield strength of 315 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

315 MPa

Show Material materials with Yield strength of 315 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

325 MPa

Show Material materials with Yield strength of 325 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

325 MPa

Show Material materials with Yield strength of 325 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

335 MPa

Show Material materials with Yield strength of 335 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

335 MPa

Show Material materials with Yield strength of 335 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

345 MPa

Show Material materials with Yield strength of 345 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

345 MPa

Show Material materials with Yield strength of 345 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

20 °C

355 MPa

Show Material materials with Yield strength of 355 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

355 MPa

Show Material materials with Yield strength of 355 MPa

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Chemical properties

PropertyValueConditionRelated StandardsShape

Carbon

0.16 %

Show Material materials with Carbon of 0.16 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Chromium

0.4 - 0.8 %

Show Material materials with Chromium of 0.4 - 0.8 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Copper

0.25 - 0.55 %

Show Material materials with Copper of 0.25 - 0.55 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Manganese

0.5 - 1.5 %

Show Material materials with Manganese of 0.5 - 1.5 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

0.5 - 1 %

Show Material materials with Manganese of 0.5 - 1 %

normalized or normalized formed (+N)

EN 10155, EN 10025-1, EN 10025-5

Bar, Sheet, Strip, Flat

Molybdenum

0.3 %

Show Material materials with Molybdenum of 0.3 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Nickel

0.65 %

Show Material materials with Nickel of 0.65 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Nitrogen

0.009 %

Show Material materials with Nitrogen of 0.009 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Phosphorus

0.035 %

Show Material materials with Phosphorus of 0.035 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

0.04 %

Show Material materials with Phosphorus of 0.04 %

normalized or normalized formed (+N)

EN 10155, EN 10025-1, EN 10025-5

Bar, Sheet, Strip, Flat

Silicon

0.5 %

Show Material materials with Silicon of 0.5 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Sulfur

0.035 %

Show Material materials with Sulfur of 0.035 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155

Strip, Sheet, Flat, Rod, Wire

0.04 %

Show Material materials with Sulfur of 0.04 %

normalized or normalized formed (+N)

EN 10155, EN 10025-1, EN 10025-5

Bar, Sheet, Strip, Flat

Zirconium

0.15 %

Show Material materials with Zirconium of 0.15 %

normalized or normalized formed (+N)

EN 10025-5, EN 10155, EN 10025-1

Strip, Sheet, Flat, Rod, Wire, Bar

Technological properties

Property
Supplier Disclaimer

The given information is a rough description and some properties can depend on various factors such as product thickness. Please contact the supplier or refer to the related norm or standard for further information.