EN 10209 Grade DC01EK cold rolled, skin passed

Want to keep this datasheet? Save it now in your required format

Description

Cold rolled low carbon steel for flat products for vitreous enamelling (one or two coats of conventional enamelling). Application: domestic appliances (cooking, laundry), sanitary ware (bathtubs, shower trays, sinks), architectural panels (interior and exterior), signage,The soft unalloyed steel DCO1EK, mat. No. 1.0390, is a cold formable steel and suitable for conventional enameling, i.e. enameling with basic enamel or with basic and cover enamel (two coating enameling). Mechanical specific values and freedom of stretcher strains are warranted for 6 months. Application: side walls for gas and electric kitchen stoves, stovepipes, flat cooking pots, lids etc. Welding: DC01EK is weldable acc. to the following fusion welding methods: MAG (metal active gas/plasma welding arc hand welding laser welding gas welding resistance welding (spot, roll seam, buckle welding)

Related Standards

Equivalent Materials

This material data has been provided by WIAM.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

20.0 °C

7.8 - 7.9 g/cm³

Show Material materials with Density of 7.8 - 7.9 g/cm³

Typical for Low Carbon Steel

Mechanical

PropertyTemperatureValueComment

Elastic modulus

20.0 °C

200 - 215 GPa

Show Material materials with Elastic modulus of 200 - 215 GPa

Typical for Low Carbon Steel

Elongation A80

20.0 °C

30 %

Show Material materials with Elongation A80 of 30 %

Elongation A80, transverse

20.0 °C

26 - 30 %

Show Material materials with Elongation A80, transverse of 26 - 30 %

Poisson's ratio

20.0 °C

0.29 [-]

Show Material materials with Poisson's ratio of 0.29 [-]

Typical for Low Carbon Steel

Tensile strength

20.0 °C

270 - 390 MPa

Show Material materials with Tensile strength of 270 - 390 MPa

Tensile strength, transverse

20.0 °C

270 - 390 MPa

Show Material materials with Tensile strength, transverse of 270 - 390 MPa

Yield strength

20.0 °C

140 - 270 MPa

Show Material materials with Yield strength of 140 - 270 MPa

Yield strength, transverse

20.0 °C

140 - 310 MPa

Show Material materials with Yield strength, transverse of 140 - 310 MPa

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

20.0 °C

1.32E-5 - 1.38E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.32E-5 - 1.38E-5 1/K

Typical for Low Carbon Steel

Melting point

1480 - 1526 °C

Show Material materials with Melting point of 1480 - 1526 °C

Typical for Low Carbon Steel

Magnetic

PropertyValueComment

Curie temperature

770 °C

Show Material materials with Curie temperature of 770 °C

Typical for Low Carbon Steel

Chemical properties

PropertyValue

Carbon

0.08 %

Show Material materials with Carbon of 0.08 %

Manganese

0.6 %

Show Material materials with Manganese of 0.6 %

Phosphorus

0.05 %

Show Material materials with Phosphorus of 0.05 %

Sulfur

0.05 %

Show Material materials with Sulfur of 0.05 %