EN 10209 Grade DC03ED cold rolled, skin passed

Want to keep this datasheet? Save it now in your required format

Description

Cold rolled low carbon steel for flat products for vitreous enamelling (direct enamelling, as well as for special applications of conventional two coat enamelling for better sag resistance). Application: domestic appliances (cooking, laundry), sanitary ware (bathtubs, shower trays, sinks), architectural panels (interior and exterior), signage,The soft unalloyed steel DCO1ED, mat. No. 1.0399, is a cold formable steel and suitable for direct enameling as well as for special conventional applications of two-coat enameling, especially if there should be preferably enameled non deforming. In this case are necessary special measures in order to improve enamel`s adhesion. Mechanical specific values and freedom of stretcher strains are warranted for 6 months. Application: simple reforming parts pots, pans, covering caps for gas kitchen stoves, baking sheets, simple shower bases etc. Welding: DC01ED is weldable acc. to the fusion welding methods: MAG (metal active gas/plasma welding arc hand welding laser welding gas welding resistance welding (spot, roll seam, buckle welding)

Related Standards

EN 10209

Equivalent Materials

This material data has been provided by WIAM.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Comment
Density	20.0 °C	7.8 - 7.9 g/cm³ Show Material materials with Density of 7.8 - 7.9 g/cm³	Typical for Low Carbon Steel

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	20.0 °C	200 - 215 GPa Show Material materials with Elastic modulus of 200 - 215 GPa	Typical for Low Carbon Steel
Elongation A80	20.0 °C	34 % Show Material materials with Elongation A80 of 34 %
Elongation A80, transverse	20.0 °C	30 - 34 % Show Material materials with Elongation A80, transverse of 30 - 34 %
Poisson's ratio	20.0 °C	0.29 [-] Show Material materials with Poisson's ratio of 0.29 [-]	Typical for Low Carbon Steel
Tensile strength	20.0 °C	270 - 370 MPa Show Material materials with Tensile strength of 270 - 370 MPa
Tensile strength, transverse	20.0 °C	270 - 370 MPa Show Material materials with Tensile strength, transverse of 270 - 370 MPa
Yield strength	20.0 °C	140 - 240 MPa Show Material materials with Yield strength of 140 - 240 MPa
Yield strength, transverse	20.0 °C	140 - 280 MPa Show Material materials with Yield strength, transverse of 140 - 280 MPa

Thermal

Property	Temperature	Value	Comment
Coefficient of thermal expansion	20.0 °C	1.32E-5 - 1.38E-5 1/K Show Material materials with Coefficient of thermal expansion of 1.32E-5 - 1.38E-5 1/K	Typical for Low Carbon Steel
Melting point		1480 - 1526 °C Show Material materials with Melting point of 1480 - 1526 °C	Typical for Low Carbon Steel

Magnetic

Property	Value	Comment
Curie temperature	770 °C Show Material materials with Curie temperature of 770 °C	Typical for Low Carbon Steel

Chemical properties

Property	Value
Carbon	4E-3 % Show Material materials with Carbon of 4E-3 %
Manganese	0.4 % Show Material materials with Manganese of 0.4 %
Phosphorus	0.04 % Show Material materials with Phosphorus of 0.04 %
Sulfur	0.05 % Show Material materials with Sulfur of 0.05 %

Looking for suppliers of this material? Click to see 1 supplier of EN 10209 Grade DC03ED cold rolled, skin passed on Matmatch