EN 10208-2 Grade L555MB thermomechanically rolled

Want to keep this datasheet? Save it now in your required format

Description

Steel L555MB is produced as welded pipe for flammable media in condition thermomechanically rolled. Its yield stress is between 555 and 675 N/mm². The steel is weldable, its carbon equivalent CEV is subject to arrangement. To the welding seam (welding methods SAW, COW) applies a mandrel-diameter for the bending test of 6x nominal thickness of the pipe. Pipes are available with interior and exterior coating. Main fields of application are long-distance pipelines for flammable liquids (e.g. crude oil and natural gas products) as well as for compressed and liquefied flammable gases. Pipes acc. to DIN EN 10208-2 : 1996-08 also fulfil the conditions decisive for the consumption acc. to standards 5L, 5LX and 5LS of the American Petroleum Institute (API). When using these pipes has to be considered the Technical rule for flammable liquids (Technische Regel für brennbare FlüssigkeitenTRbF 301).

Related Standards

Equivalent Materials

This material data has been provided by WIAM.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

7.8 g/cm³

Show Material materials with Density of 7.8 g/cm³

Typical for Steel

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

190 - 210 GPa

Show Material materials with Elastic modulus of 190 - 210 GPa

Typical for Steel

Elongation

20.0 °C

20 %

Show Material materials with Elongation of 20 %

Elongation, transverse

20.0 °C

18 %

Show Material materials with Elongation, transverse of 18 %

Poisson's ratio

23.0 °C

0.3 [-]

Show Material materials with Poisson's ratio of 0.3 [-]

Typical for Steel

Tensile strength

20.0 °C

625 MPa

Show Material materials with Tensile strength of 625 MPa

Yield strength

20.0 °C

555 - 675 MPa

Show Material materials with Yield strength of 555 - 675 MPa

Yield strength Rp0.5

20.0 °C

555 - 675 MPa

Show Material materials with Yield strength Rp0.5 of 555 - 675 MPa

Chemical properties

PropertyValue

Aluminium

0.015 - 0.06 %

Show Material materials with Aluminium of 0.015 - 0.06 %

Carbon

0.16 %

Show Material materials with Carbon of 0.16 %

Chromium

0.3 %

Show Material materials with Chromium of 0.3 %

Copper

0.25 %

Show Material materials with Copper of 0.25 %

Manganese

1.8 %

Show Material materials with Manganese of 1.8 %

Molybdenum

0.1 %

Show Material materials with Molybdenum of 0.1 %

Nickel

0.3 %

Show Material materials with Nickel of 0.3 %

Niobium

0.06 %

Show Material materials with Niobium of 0.06 %

Nitrogen

0.01 %

Show Material materials with Nitrogen of 0.01 %

Phosphorus

0.03 %

Show Material materials with Phosphorus of 0.03 %

Silicon

0.45 %

Show Material materials with Silicon of 0.45 %

Sulfur

0.02 %

Show Material materials with Sulfur of 0.02 %

Titanium

0.06 %

Show Material materials with Titanium of 0.06 %

Vanadium

0.1 %

Show Material materials with Vanadium of 0.1 %