EN 10213 Grade G9Ni14 quenched and tempered (+QT)

Want to keep this datasheet? Save it now in your required format

Description

Material G9Ni14 is equivalent to trademark GS-10 Ni 14 acc. to SEW 685-89. It is applicated at low temperatures. It is used for refrigerating plants and fittings up to approx. -90 °C.

Related Standards

Equivalent Materials

This material data has been provided by WIAM.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value
Density	20.0 °C	7.85 g/cm³ Show Material materials with Density of 7.85 g/cm³

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	200 - 215 GPa Show Material materials with Elastic modulus of 200 - 215 GPa	Typical for Nickel Steel
Elongation	20.0 °C	20 % Show Material materials with Elongation of 20 %
Poisson's ratio	23.0 °C	0.29 [-] Show Material materials with Poisson's ratio of 0.29 [-]	Typical for Nickel Steel
Shear modulus	23.0 °C	76 GPa Show Material materials with Shear modulus of 76 GPa	Typical for Nickel Steel
Tensile strength	20.0 °C	500 - 650 MPa Show Material materials with Tensile strength of 500 - 650 MPa
Yield strength Rp0.2	20.0 °C	360 MPa Show Material materials with Yield strength Rp0.2 of 360 MPa
	100.0 °C	255 MPa Show Material materials with Yield strength Rp0.2 of 255 MPa
	150.0 °C	235 MPa Show Material materials with Yield strength Rp0.2 of 235 MPa
	200.0 °C	215 MPa Show Material materials with Yield strength Rp0.2 of 215 MPa
	250.0 °C	190 MPa Show Material materials with Yield strength Rp0.2 of 190 MPa
	300.0 °C	175 MPa Show Material materials with Yield strength Rp0.2 of 175 MPa

Thermal

Property	Temperature	Value	Comment
Coefficient of thermal expansion	-195.0 °C	8.5E-6 1/K Show Material materials with Coefficient of thermal expansion of 8.5E-6 1/K
	-170.0 °C	9E-6 1/K Show Material materials with Coefficient of thermal expansion of 9E-6 1/K
	-120.0 °C	9.8E-6 1/K Show Material materials with Coefficient of thermal expansion of 9.8E-6 1/K
	-50.0 °C	1.04E-5 1/K Show Material materials with Coefficient of thermal expansion of 1.04E-5 1/K
	-25.0 °C	1.06E-5 1/K Show Material materials with Coefficient of thermal expansion of 1.06E-5 1/K
	Unlock all property charts
Max service temperature, long		-90 - 0 °C Show Material materials with Max service temperature, long of -90 - 0 °C
Melting point		1316 - 1595 °C Show Material materials with Melting point of 1316 - 1595 °C	Typical for Nickel Steel
Specific heat capacity	20.0 °C	460 J/(kg·K) Show Material materials with Specific heat capacity of 460 J/(kg·K)
Thermal conductivity	-20.0 °C	35 W/(m·K) Show Material materials with Thermal conductivity of 35 W/(m·K)

Chemical properties

Property	Value
Carbon	0.06 - 0.12 % Show Material materials with Carbon of 0.06 - 0.12 %
Chromium	0.3 % Show Material materials with Chromium of 0.3 %
Copper	0.3 % Show Material materials with Copper of 0.3 %
Manganese	0.5 - 0.8 % Show Material materials with Manganese of 0.5 - 0.8 %
Molybdenum	0.2 % Show Material materials with Molybdenum of 0.2 %
Nickel	3 - 4 % Show Material materials with Nickel of 3 - 4 %
Phosphorus	0.02 % Show Material materials with Phosphorus of 0.02 %
Silicon	0.6 % Show Material materials with Silicon of 0.6 %
Sulfur	0.015 % Show Material materials with Sulfur of 0.015 %
Vanadium	0.05 % Show Material materials with Vanadium of 0.05 %