EN 10213 Grade GX3CrNi13-4 quenched and tempered (+QT)

Want to keep this datasheet? Save it now in your required format

Description

Material GX3CrNi13-4 is equivalent to trademark G-X 3 CrNi 13 4 acc. to SEW 685-89. It combines high strength and very good cryogenic properties. It is used at low temperatures in refrigerator construction up to approx. -120 °C. Material G-X 5 CrNi 13 4, material number 1.4313 is acc. to VdTÜV-material specification 452 applicable for pressure vessels acc. to TRB 100 (and AD-data sheets W5 and W10) from -120 to 20 °C. Further application for blade and guide wheels for pumps, compressors and turbines as well as for pump casings and machine components in hydraulic installations from -120 to 20 °C. Further application in the nuclear power engineering if the relevant specifications allow the application at -120 to 20 °C. The welding suitability of the steel cast is examined for the welding methods TIG-welding, metal arc welding and submerged welding. After the welding the material have to cool down under 80 deg. for an following heat-treatment. An double tempering or stress relieve annealing is possible. After the double tempering an decrease of the strength should considered. The cooling rate until below 300 °C should not exceed 80 K/h. By the welding in the production of thin-walled parts its possible to abandon the pre-heating, tempering or stress relieve annealing if appropriate verification was done.

Related Standards

Equivalent Materials

This material data has been provided by WIAM.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValue

Density

20.0 °C

7.7 g/cm³

Show Material materials with Density of 7.7 g/cm³

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

190 - 210 GPa

Show Material materials with Elastic modulus of 190 - 210 GPa

Typical for Steel

Elongation

20.0 °C

15 %

Show Material materials with Elongation of 15 %

Poisson's ratio

23.0 °C

0.3 [-]

Show Material materials with Poisson's ratio of 0.3 [-]

Typical for Steel

Tensile strength

20.0 °C

700 - 900 MPa

Show Material materials with Tensile strength of 700 - 900 MPa

Yield strength Rp0.2

20.0 °C

500 MPa

Show Material materials with Yield strength Rp0.2 of 500 MPa

100.0 °C

515 MPa

Show Material materials with Yield strength Rp0.2 of 515 MPa

150.0 °C

500 MPa

Show Material materials with Yield strength Rp0.2 of 500 MPa

200.0 °C

485 MPa

Show Material materials with Yield strength Rp0.2 of 485 MPa

250.0 °C

470 MPa

Show Material materials with Yield strength Rp0.2 of 470 MPa

300.0 °C

455 MPa

Show Material materials with Yield strength Rp0.2 of 455 MPa

Thermal

PropertyTemperatureValue

Coefficient of thermal expansion

-195.0 °C

8.6E-6 1/K

Show Material materials with Coefficient of thermal expansion of 8.6E-6 1/K

-170.0 °C

9.3E-6 1/K

Show Material materials with Coefficient of thermal expansion of 9.3E-6 1/K

-120.0 °C

1.01E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.01E-5 1/K

-50.0 °C

1.08E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.08E-5 1/K

-25.0 °C

1.1E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.1E-5 1/K

100.0 °C

1.05E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.05E-5 1/K

300.0 °C

1.1E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.1E-5 1/K

500.0 °C

1.2E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.2E-5 1/K

Unlock all property charts

Max service temperature, long

-120 - 20 °C

Show Material materials with Max service temperature, long of -120 - 20 °C

Specific heat capacity

20.0 °C

460 J/(kg·K)

Show Material materials with Specific heat capacity of 460 J/(kg·K)

Thermal conductivity

-20.0 °C

30 W/(m·K)

Show Material materials with Thermal conductivity of 30 W/(m·K)

50.0 °C

26 W/(m·K)

Show Material materials with Thermal conductivity of 26 W/(m·K)

100.0 °C

27 W/(m·K)

Show Material materials with Thermal conductivity of 27 W/(m·K)

Unlock all property charts

Chemical properties

PropertyValue

Carbon

0.05 %

Show Material materials with Carbon of 0.05 %

Chromium

12 - 13.5 %

Show Material materials with Chromium of 12 - 13.5 %

Copper

0.3 %

Show Material materials with Copper of 0.3 %

Manganese

1 %

Show Material materials with Manganese of 1 %

Molybdenum

0.7 %

Show Material materials with Molybdenum of 0.7 %

Nickel

3.5 - 5 %

Show Material materials with Nickel of 3.5 - 5 %

Phosphorus

0.04 %

Show Material materials with Phosphorus of 0.04 %

Silicon

1 %

Show Material materials with Silicon of 1 %

Sulfur

0.015 %

Show Material materials with Sulfur of 0.015 %

Vanadium

0.08 %

Show Material materials with Vanadium of 0.08 %