EN 10139 Grade DC01 cold-rolled, strain-hardened (C290)

View suppliers (50)
Want to keep this datasheet? Save it now in your required format

Description

Cold rolled uncoated low carbon steel narrow strip for cold forming.,The non-alloy steel DC01 acc. to DIN EN 10130 is suitable for cold forming of simple profile forms and components. Mechanical foldings are possible for thicknesses of up to 1,5 mm. To freedom of stretcher strains applies a period of 3 months after provision of the products for surface type B. Welding: DC01 is weldable by the following welding methods: MAG (metal-active-gas), plasma welding, laser welding, compression weld welding, resistance welding (spot, roll weld, buckle welding), arc welding. The steel acts as substrate for surface refined and coated bands and sheets. Application of DC01: household appliances industry, construction trade, car manufacturing, traffic system. Acc. to DIN EN 10139 DC01 is offered as cold rolled band or bar, cut in strength range HK270 to HK690. On welding of DC01in condition HK290 to HK690 has to be considered the potential influence to the mechanical properties

Related Standards

Equivalent Materials

This material data has been provided by WIAM.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

20.0 °C

7.8 - 7.9 g/cm³

Show Material materials with Density of 7.8 - 7.9 g/cm³

Typical for Low Carbon Steel

Mechanical

PropertyTemperatureValueComment

Elastic modulus

20.0 °C

200 - 215 GPa

Show Material materials with Elastic modulus of 200 - 215 GPa

Typical for Low Carbon Steel

Elongation

20.0 °C

24 %

Show Material materials with Elongation of 24 %

Elongation A50

20.0 °C

20 %

Show Material materials with Elongation A50 of 20 %

Elongation A80

20.0 °C

18 %

Show Material materials with Elongation A80 of 18 %

Hardness, Vickers

20.0 °C

95 - 125 [-]

Show Material materials with Hardness, Vickers of 95 - 125 [-]

Poisson's ratio

20.0 °C

0.29 [-]

Show Material materials with Poisson's ratio of 0.29 [-]

Typical for Low Carbon Steel

Tensile strength

20.0 °C

290 - 430 MPa

Show Material materials with Tensile strength of 290 - 430 MPa

Yield strength

20.0 °C

200 - 380 MPa

Show Material materials with Yield strength of 200 - 380 MPa

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

20.0 °C

1.32E-5 - 1.38E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.32E-5 - 1.38E-5 1/K

Typical for Low Carbon Steel

Melting point

1480 - 1526 °C

Show Material materials with Melting point of 1480 - 1526 °C

Typical for Low Carbon Steel

Magnetic

PropertyValueComment

Curie temperature

770 °C

Show Material materials with Curie temperature of 770 °C

Typical for Low Carbon Steel

Chemical properties

PropertyValue

Carbon

0.12 %

Show Material materials with Carbon of 0.12 %

Manganese

0.6 %

Show Material materials with Manganese of 0.6 %

Phosphorus

0.05 %

Show Material materials with Phosphorus of 0.05 %

Sulfur

0.045 %

Show Material materials with Sulfur of 0.045 %