Show me around

ASTM A53 Grade B Type E

Want to keep this datasheet? Save it now in your required format

Description

Related Standards

Ashby charts

See where ASTM A53 Grade B Type E falls on the material property chart for Density against Elastic modulus in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

Density

ρ

7.8 - 7.9 g/cm³ at 20 °C

Typical for Medium Carbon Steel

Mechanical

Elastic modulus

E

200 - 215 GPa at 20 °C

Show Medium Carbon Steel materials with Elastic modulus of 200 - 215 GPa at 20 °C

Typical for Medium Carbon Steel

Poisson's ratio

ν

0.29 [-] at 20 °C

Show Medium Carbon Steel materials with Poisson's ratio of 0.29 [-] at 20 °C

Typical for Medium Carbon Steel

Shear modulus

G

75 - 80 GPa at 20 °C

Show Medium Carbon Steel materials with Shear modulus of 75 - 80 GPa at 20 °C

Typical for Carbon Steel

Tensile strength

Rm

415 MPa at 20 °C

Show Medium Carbon Steel materials with Tensile strength of 415 MPa at 20 °C

Yield strength Rp0.2

Rp0.2

240 MPa at 20 °C

Show Medium Carbon Steel materials with Yield strength Rp0.2 of 240 MPa at 20 °C

Thermal

Coefficient of thermal expansion

α

1.32E-5 1/K at 20 °C

Typical for Medium Carbon Steel

Max service temperature

Tmax

500 °C

Typical for Carbon Steel

Melting point

Tm

1380 - 1514 °C

Typical for Medium Carbon Steel

Specific heat capacity

cp

465 - 483 J/(kg·K) at 20 °C

Typical for Carbon Steel

Thermal conductivity

λ

36 - 54 W/(m·K) at 20 °C

Typical for Carbon Steel

Electrical

Electrical resistivity

ρel

1.43E-7 - 1.74E-7 Ω·m at 20 °C

Typical for Carbon Steel

Chemical properties

Element

Weight %

Comment

Mn

1.2 %

Cr

0.4 %

Cu

0.4 %

Ni

0.4 %

C

0.3 %

More

This material data has been provided by ASTM.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.