Low Density Polyethylene (LDPE)

Alternative and trade names
Lupolen®, Purell®, Pharmalene®, Riblene®, Alfaten
Want to keep this datasheet? Save it now in your required format

Description

It is a low density polyethylene resin. It exhibits very good softness and toughness and good dimensional stability. Semi-rigid, translucent, very tough, weatherproof, good chemical resistance, low water absorption, easily processed by most methods, low cost.

This material data has been provided by M-Base.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyValue

Density

0.915 - 0.92 g/cm³

Show Material materials with Density of 0.915 - 0.92 g/cm³

Mechanical

PropertyValueComment

Elastic modulus

0.2 - 0.48 GPa

Show Material materials with Elastic modulus of 0.2 - 0.48 GPa

Elongation

100.0 - 1000.0 %

Show Material materials with Elongation of 100.0 - 1000.0 %

Tensile strength

6.0 - 17.0 MPa

Show Material materials with Tensile strength of 6.0 - 17.0 MPa

at 15-25% strain

Impact strength, Charpy unnotched

no break

Thermal

PropertyValue

Coefficient of thermal expansion

0.00023 - 0.00025 1/K

Show Material materials with Coefficient of thermal expansion of 0.00023 - 0.00025 1/K

Melting point

105.0 - 120.0 °C

Show Material materials with Melting point of 105.0 - 120.0 °C

Specific heat capacity

2100.0 - 2500.0 J/(kg·K)

Show Material materials with Specific heat capacity of 2100.0 - 2500.0 J/(kg·K)

Thermal conductivity

0.32 - 0.4 W/(m·K)

Show Material materials with Thermal conductivity of 0.32 - 0.4 W/(m·K)

Flammability

UL 94 HB

Electrical

PropertyValue

Dielectric constant

2.2 [-]

Show Material materials with Dielectric constant of 2.2 [-]

2.3 [-]

Show Material materials with Dielectric constant of 2.3 [-]

Electrical resistivity

1000000000000000.0 Ω·m

Show Material materials with Electrical resistivity of 1000000000000000.0 Ω·m

Optical

PropertyValue

Transparency

no

Technological properties

Property
Application areas

Films for packaging, agricultural films, carrying bags, heavy-duty sacks, wine bottle closures

Other

You are viewing a generic polymer page, for more information please contact the suppliers or Matmatch, or use our Search under the following link to find more specific grades and formulations based on your application:

Polymer Advanced Search

Processing methods

Injection molding, blow molding, extrusion, compression molding, thermoforming, coating