Properties
General
| Property | Value | Comment |
|---|---|---|
Density | 7.8 g/cm³ Show Material materials with Density of 7.8 g/cm³ | Typical for Steel |
Mechanical
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Elastic modulus | 190 - 210 GPa Show Material materials with Elastic modulus of 190 - 210 GPa | Typical for Steel | ||||
Elongation | 16.9 % Show Material materials with Elongation of 16.9 % | Predicted Value, A200 | ||||
17.4 % Show Material materials with Elongation of 17.4 % | Predicted Value, A80 | |||||
19.2 % Show Material materials with Elongation of 19.2 % | Predicted Value, A80 Transverse | |||||
20.5 % Show Material materials with Elongation of 20.5 % | Predicted Value, A5 | |||||
20.5 % Show Material materials with Elongation of 20.5 % | Predicted Value, Transverse | |||||
22.8 % Show Material materials with Elongation of 22.8 % | Predicted Value, A50 | |||||
20 °C | 19 % Show Material materials with Elongation of 19 % | thermomechanically rolled | EN 10028-5 | Flat | ||
Hardness, Brinell | 248 [-] Show Material materials with Hardness, Brinell of 248 [-] | Predicted Value, Transverse | ||||
Poisson's ratio | 0.3 [-] Show Material materials with Poisson's ratio of 0.3 [-] | Typical for Steel | ||||
Reduction of area | 40.4 % Show Material materials with Reduction of area of 40.4 % | Predicted Value | ||||
44.4 % Show Material materials with Reduction of area of 44.4 % | Predicted Value, Transverse | |||||
Shear modulus | 79.9 GPa Show Material materials with Shear modulus of 79.9 GPa | Predicted Value | ||||
Shear strength | 558.8 MPa Show Material materials with Shear strength of 558.8 MPa | Predicted Value | ||||
Tensile strength | 20 °C | 500 - 660 MPa Show Material materials with Tensile strength of 500 - 660 MPa | thermomechanically rolled | EN 10028-5 | Flat | |
Yield strength | 255.4 MPa Show Material materials with Yield strength of 255.4 MPa | Predicted Value, RP1 | ||||
318.5 MPa Show Material materials with Yield strength of 318.5 MPa | Predicted Value, RP1 Transverse | |||||
421.1 MPa Show Material materials with Yield strength of 421.1 MPa | Predicted Value, RP02 | |||||
429.3 MPa Show Material materials with Yield strength of 429.3 MPa | Predicted Value, Transverse | |||||
460.9 MPa Show Material materials with Yield strength of 460.9 MPa | Predicted Value, RP02 Transverse | |||||
494.6 MPa Show Material materials with Yield strength of 494.6 MPa | Predicted Value, RP002 | |||||
511.5 MPa Show Material materials with Yield strength of 511.5 MPa | Predicted Value, RP05 | |||||
20 °C | 390 MPa Show Material materials with Yield strength of 390 MPa | thermomechanically rolled | EN 10028-5 | Flat | ||
20 °C | 400 MPa Show Material materials with Yield strength of 400 MPa | thermomechanically rolled | EN 10028-5 | Flat | ||
20 °C | 420 MPa Show Material materials with Yield strength of 420 MPa | thermomechanically rolled | EN 10028-5 | Flat |
Thermal
| Property | Value | Comment |
|---|---|---|
Coefficient of thermal expansion | 11.74 1/K Show Material materials with Coefficient of thermal expansion of 11.74 1/K | Predicted Value |
Specific heat capacity | 453.6 J/(kg·K) Show Material materials with Specific heat capacity of 453.6 J/(kg·K) | Predicted Value |
Thermal conductivity | 38 W/(m·K) Show Material materials with Thermal conductivity of 38 W/(m·K) | Predicted Value |
Electrical
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Aluminium | 0.02 % Show Material materials with Aluminium of 0.02 % | thermomechanically rolled | EN 10028-5 | Flat |
Carbon | 0.16 % Show Material materials with Carbon of 0.16 % | thermomechanically rolled | EN 10028-5 | Flat |
Manganese | 1.7 % Show Material materials with Manganese of 1.7 % | thermomechanically rolled | EN 10028-5 | Flat |
Molybdenum | 0.2 % Show Material materials with Molybdenum of 0.2 % | thermomechanically rolled | EN 10028-5 | Flat |
Nickel | 0.5 % Show Material materials with Nickel of 0.5 % | thermomechanically rolled | EN 10028-5 | Flat |
Niobium | 0.05 % Show Material materials with Niobium of 0.05 % | thermomechanically rolled | EN 10028-5 | Flat |
Nitrogen | 0.02 % Show Material materials with Nitrogen of 0.02 % | thermomechanically rolled | EN 10028-5 | Flat |
Phosphorus | 0.025 % Show Material materials with Phosphorus of 0.025 % | thermomechanically rolled | EN 10028-5 | Flat |
Silicon | 0.5 % Show Material materials with Silicon of 0.5 % | thermomechanically rolled | EN 10028-5 | Flat |
Sulfur | 0.01 % Show Material materials with Sulfur of 0.01 % | thermomechanically rolled | EN 10028-5 | Flat |
0.02 % Show Material materials with Sulfur of 0.02 % | thermomechanically rolled | EN 10028-5 | Flat | |
Titanium | 0.05 % Show Material materials with Titanium of 0.05 % | thermomechanically rolled | EN 10028-5 | Flat |
Vanadium | 0.1 % Show Material materials with Vanadium of 0.1 % | thermomechanically rolled | EN 10028-5 | Flat |
Technological properties
| Property | ||
|---|---|---|
| Supplier Disclaimer | The given information is a rough description and some properties can depend on various factors such as product thickness. Please contact the supplier or refer to the related norm or standard for further information. | |