EN 10088-1 Grade X29CrS13 quenched and tempered (+QT850)

Want to keep this datasheet? Save it now in your required format

Description

The martensitic (special grade) X29S13 is well machinable and used for turned parts.

Related Standards

Equivalent Materials

This material data has been provided by WIAM.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValue

Density

20.0 °C

7.7 g/cm³

Show Material materials with Density of 7.7 g/cm³

Mechanical

PropertyTemperatureValueComment

Elastic modulus

20.0 °C

215 GPa

Show Material materials with Elastic modulus of 215 GPa

100.0 °C

212 GPa

Show Material materials with Elastic modulus of 212 GPa

200.0 °C

205 GPa

Show Material materials with Elastic modulus of 205 GPa

300.0 °C

200 GPa

Show Material materials with Elastic modulus of 200 GPa

400.0 °C

190 GPa

Show Material materials with Elastic modulus of 190 GPa

Elongation

20.0 °C

8 - 12 %

Show Material materials with Elongation of 8 - 12 %

Poisson's ratio

23.0 °C

0.3 [-]

Show Material materials with Poisson's ratio of 0.3 [-]

Typical for Martensitic Stainless Steel

Shear modulus

23.0 °C

77 GPa

Show Material materials with Shear modulus of 77 GPa

Typical for Martensitic Stainless Steel

Tensile strength

20.0 °C

850 - 1100 MPa

Show Material materials with Tensile strength of 850 - 1100 MPa

Tensile strength, transverse

20.0 °C

850 - 1100 MPa

Show Material materials with Tensile strength, transverse of 850 - 1100 MPa

Yield strength Rp0.2

20.0 °C

650 - 750 MPa

Show Material materials with Yield strength Rp0.2 of 650 - 750 MPa

Yield strength Rp0.2, transverse

20.0 °C

650 - 750 MPa

Show Material materials with Yield strength Rp0.2, transverse of 650 - 750 MPa

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

100.0 °C

1.05E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.05E-5 1/K

300.0 °C

1.15E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.15E-5 1/K

Unlock all property charts

Melting point

1370 - 1530 °C

Show Material materials with Melting point of 1370 - 1530 °C

Typical for Martensitic Stainless Steel

Specific heat capacity

20.0 °C

460 J/(kg·K)

Show Material materials with Specific heat capacity of 460 J/(kg·K)

Thermal conductivity

20.0 °C

30 W/(m·K)

Show Material materials with Thermal conductivity of 30 W/(m·K)

Electrical

PropertyTemperatureValue

Electrical resistivity

20.0 °C

5.5E-7 Ω·m

Show Material materials with Electrical resistivity of 5.5E-7 Ω·m

Chemical properties

PropertyValue

Carbon

0.25 - 0.32 %

Show Material materials with Carbon of 0.25 - 0.32 %

Chromium

12 - 13.5 %

Show Material materials with Chromium of 12 - 13.5 %

Manganese

1.5 %

Show Material materials with Manganese of 1.5 %

Molybdenum

0.6 %

Show Material materials with Molybdenum of 0.6 %

Phosphorus

0.04 %

Show Material materials with Phosphorus of 0.04 %

Silicon

1 %

Show Material materials with Silicon of 1 %

Sulfur

0.15 - 0.25 %

Show Material materials with Sulfur of 0.15 - 0.25 %