DIN 17440 Grade X14CrMoS17 soft annealed (+A)

View suppliers (7)
Want to keep this datasheet? Save it now in your required format

Description

The material X14CrMoS17 is used acc. DIN 17440 : 1996-09 for rods (for pressure vessels), forgings and drawn wire. For the application acc. DIN 17440 : 1985-07 (X 12 CrMoS 17) resp. acc. DIN EN 10088-1,-2,-3 : 1995-08 (X14CrMoS17) applies: stainless free-cutting steel used in the quenched and tempered condition for construction parts like screws, nuts, fittings, axles, bolts, spindles in water, steam and weak alkaline and neutral media as well as for solenoid valves. Because of the S-content the corrosion resistance is comparable to an steel with 13% Cr.

Related Standards

Equivalent Materials

This material data has been provided by WIAM.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValue

Density

20.0 °C

7.65 - 7.7 g/cm³

Show Material materials with Density of 7.65 - 7.7 g/cm³

Mechanical

PropertyTemperatureValueComment

Elastic modulus

20.0 °C

196 - 216 GPa

Show Material materials with Elastic modulus of 196 - 216 GPa

100.0 °C

213 GPa

Show Material materials with Elastic modulus of 213 GPa

200.0 °C

207 GPa

Show Material materials with Elastic modulus of 207 GPa

300.0 °C

200 GPa

Show Material materials with Elastic modulus of 200 GPa

400.0 °C

192 GPa

Show Material materials with Elastic modulus of 192 GPa

Elongation

20.0 °C

16 %

Show Material materials with Elongation of 16 %

Hardness, Brinell

20.0 °C

230 [-]

Show Material materials with Hardness, Brinell of 230 [-]

Hardness, Vickers

20.0 °C

230 [-]

Show Material materials with Hardness, Vickers of 230 [-]

Poisson's ratio

23.0 °C

0.3 [-]

Show Material materials with Poisson's ratio of 0.3 [-]

Typical for Ferritic Stainless Steel

Shear modulus

23.0 °C

77 GPa

Show Material materials with Shear modulus of 77 GPa

Typical for Ferritic Stainless Steel

Tensile strength

20.0 °C

540 - 740 MPa

Show Material materials with Tensile strength of 540 - 740 MPa

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

-100.0 °C

9.2E-6 1/K

Show Material materials with Coefficient of thermal expansion of 9.2E-6 1/K

20.0 °C

9.9E-6 1/K

Show Material materials with Coefficient of thermal expansion of 9.9E-6 1/K

100.0 °C

1E-5 - 1.03E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1E-5 - 1.03E-5 1/K

200.0 °C

1.05E-5 - 1.08E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.05E-5 - 1.08E-5 1/K

300.0 °C

1.05E-5 - 1.12E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.05E-5 - 1.12E-5 1/K

400.0 °C

1.05E-5 - 1.16E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.05E-5 - 1.16E-5 1/K

500.0 °C

1.1E-5 - 1.19E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.1E-5 - 1.19E-5 1/K

600.0 °C

1.21E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.21E-5 1/K

700.0 °C

1.24E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.24E-5 1/K

800.0 °C

1.29E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.29E-5 1/K

900.0 °C

1.34E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.34E-5 1/K

1000.0 °C

1.39E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.39E-5 1/K

Unlock all property charts

Melting point

1425 - 1530 °C

Show Material materials with Melting point of 1425 - 1530 °C

Typical for Ferritic Stainless Steel

Specific heat capacity

20.0 °C

450 - 460 J/(kg·K)

Show Material materials with Specific heat capacity of 450 - 460 J/(kg·K)

100.0 °C

482 J/(kg·K)

Show Material materials with Specific heat capacity of 482 J/(kg·K)

200.0 °C

506 J/(kg·K)

Show Material materials with Specific heat capacity of 506 J/(kg·K)

300.0 °C

525 J/(kg·K)

Show Material materials with Specific heat capacity of 525 J/(kg·K)

400.0 °C

547 J/(kg·K)

Show Material materials with Specific heat capacity of 547 J/(kg·K)

500.0 °C

576 J/(kg·K)

Show Material materials with Specific heat capacity of 576 J/(kg·K)

600.0 °C

616 J/(kg·K)

Show Material materials with Specific heat capacity of 616 J/(kg·K)

Unlock all property charts

Thermal conductivity

20.0 °C

19.6 - 25 W/(m·K)

Show Material materials with Thermal conductivity of 19.6 - 25 W/(m·K)

Thermal diffusivity

20.0 °C

5.7 mm²/s

Show Material materials with Thermal diffusivity of 5.7 mm²/s

Electrical

PropertyTemperatureValue

Electrical resistivity

20.0 °C

6.17E-7 - 7E-7 Ω·m

Show Material materials with Electrical resistivity of 6.17E-7 - 7E-7 Ω·m

Chemical properties

PropertyValue

Carbon

0.1 - 0.17 %

Show Material materials with Carbon of 0.1 - 0.17 %

Chromium

15.5 - 17.5 %

Show Material materials with Chromium of 15.5 - 17.5 %

Manganese

1.5 %

Show Material materials with Manganese of 1.5 %

Molybdenum

0.2 - 0.6 %

Show Material materials with Molybdenum of 0.2 - 0.6 %

Phosphorus

0.04 %

Show Material materials with Phosphorus of 0.04 %

Silicon

1 %

Show Material materials with Silicon of 1 %

Sulfur

0.15 - 0.35 %

Show Material materials with Sulfur of 0.15 - 0.35 %