UNS S17400 Hardened

Want to keep this datasheet? Save it now in your required format

Equivalent Materials

This material data has been provided by MakeItFrom.com.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value
Density	23.0 °C	7.8 g/cm³ Show Material materials with Density of 7.8 g/cm³

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	200 GPa Show Material materials with Elastic modulus of 200 GPa
Elongation	23.0 °C	11 - 21 % Show Material materials with Elongation of 11 - 21 %
Poisson's ratio	23.0 °C	0.3 [-] Show Material materials with Poisson's ratio of 0.3 [-]	Typical for Steel
Tensile strength	23.0 °C	910 - 1410 MPa Show Material materials with Tensile strength of 910 - 1410 MPa
Yield strength	23.0 °C	600 - 1260 MPa Show Material materials with Yield strength of 600 - 1260 MPa

Thermal

Property	Temperature	Value
Coefficient of thermal expansion	23.0 °C	1.3E-5 1/K Show Material materials with Coefficient of thermal expansion of 1.3E-5 1/K
Melting point		1400 °C Show Material materials with Melting point of 1400 °C
Specific heat capacity	23.0 °C	500 J/(kg·K) Show Material materials with Specific heat capacity of 500 J/(kg·K)
Thermal conductivity	23.0 °C	16 W/(m·K) Show Material materials with Thermal conductivity of 16 W/(m·K)

Chemical properties

Property	Value
Carbon	0 - 0.07 % Show Material materials with Carbon of 0 - 0.07 %
Chromium	15 - 17 % Show Material materials with Chromium of 15 - 17 %
Copper	3 - 5 % Show Material materials with Copper of 3 - 5 %
Iron	69.6 - 79 % Show Material materials with Iron of 69.6 - 79 %
Manganese	0 - 1.5 % Show Material materials with Manganese of 0 - 1.5 %
Molybdenum	0 - 0.6 % Show Material materials with Molybdenum of 0 - 0.6 %
Nickel	3 - 5 % Show Material materials with Nickel of 3 - 5 %
Niobium	0 - 0.45 % Show Material materials with Niobium of 0 - 0.45 %
Phosphorus	0 - 0.04 % Show Material materials with Phosphorus of 0 - 0.04 %
Silicon	0 - 1 % Show Material materials with Silicon of 0 - 1 %
Sulfur	0 - 0.03 % Show Material materials with Sulfur of 0 - 0.03 %

UNS S17400 Hardened

Equivalent Materials

Ashby charts

Suggested reading

Properties